The Vapefly PIXIE 22mm RDA is a simplified single coil vape, introducing a notched dual post build deck, interchangeable airflow set, and a gold-plated BF squonking pin to create a great RDA for beginners or experienced builders looking for a squonk RDA. The Vapefly Pixie utilizes a notched dual post build deck to align the coil above the air outlets and into the terminals on each post. The Vapefly Pixie also features an interchangeable airflow set that can be located on the middle cap, selecting between a larger single airflow or a triple airflow inlet that can be pushed out during assembly for the desired airflow. Furthermore, the knurled airflow adjustment top cap hosts two airflow inlets of differing size to ensure the perfect airflow for the atomizer and coil combination.
Vapefly Pixie 22mm RDA Features:
22mm Diameter
Deep Juice Wells
Superior Stainless Steel and Delrin Construction
Dual Post Build Deck
Top Secured via Hex Screws
PEEK Insulator
Single Side Coil Configuration - No Spitting
Notched Build Deck for Coil Alignment
Knurled Delrin and SS Top Cap Airflow Control
Interchangeable Airflow Set Located on Middle Cap
810 Delrin Drip Tip
Detachable Structure
Spring-Loaded Gold-Plated 510 Connection
Gold-Plated BF Squonk Pin
Available in Black, Stainless Steel, Rainbow, Gold, Gunmetal
Includes:
1 Vapefly Pixie 22mm RDA
1 BF Squonk Pin
2 Hex Screws
2 Screwdrivers
2 Vapefly Firebolt Cotton
2 0.35ohm Coils
1 Manual
1 Pack of O-Rings
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.
The products available on Element Vape are age-restricted and intended
for adults of legal smoking age only. All orders placed on the website will
be verified by an industry leading Age Verification software for validation.
By entering our website, you affirm that you are of legal smoking age in your
jurisdication and you agree to be Age Verified.
Shall we send you a message when we have discounts available?
Remind me later
Thank you! Please check your email inbox to confirm.