Vapefly x German 103 Brunhilde Top Coiler 25mm RTA

The Vapefly x German 103 Brunhilde Top Coiler 25mm RTA is fusion of tried and true features combined with new technologies, utilizing a stainless steel wicking system, single side fill port, and is capable of containing up to 8.0mL of today's eJuice to create a innovative rebuildable tank vape that is sure to dazzle those around you. Created in collaboration with German 103, a design team based out of Germany consisting of 103 members. Forged to be different, the Brunhilde 25mm RTA utilizes stainless steel, glass, and gold plating construction, all standard but great materials for usage in the construction of an RTA. A single wall bisects the build deck, sporting 4 open terminals, allowing the builder to snip off beefy and larger exotic coil leads, for a dual coil configuration. In addition, at the bottom of the 5mm juice well is a set of four bored pass through holes with a stainless steel wick nestled in the center of each. These stainless steel wicks allow for eJuice to travel along the grooved and braided wires via capillary fluid movement to automatically soak the cotton materials loaded into the coil. Airflow is inlet via single large airflow as well as a set of 6 holes per side on the top cap to promote airflow all around the coil structure for the best taste and greatest possible clouds.

Vapefly x German 103 Brunhilde Top Coiler 25mm RTA:

• Collaboration with German 103 Design Team
• 25mm Diameter
• 8.0mL Tank Capacity
• Pyrex Glass Reinforcement
• Superior Stainless Steel Construction
• Side Fill Port - Turn Top Cap for Access Port
• Dual Coil Configuration
• PEEK Insulated
• Single Center Wall Post Build Deck - 4 Open Terminals
• Side Secured via Hex Screws
• Build Deck Outlet Airflows - 6 Per Side of Center Post Wall
• Deck Based Airflow & Top Cap Based Airflow Control
• 4 Stainless Steel Wicking Posts
• 5mm Deep Juice/Cotton Wells
• Threaded 510 Connection
• Available in Black or SS

Includes:

• 1 Brunhilde Top Coiler RTA
• 1 510 Adapter
• 1 Spare Parts Bag
• 2 Firebolt Cotton
• 2 0.35 ohm Prebuilt Coils
• 1 Spare Glass Tank Section
• 1 Stainless Steel Wire from Germany
• 1 User Manual

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.