Vandy Vape Performance Prebuilt Coils

Vandy Vape Performance Prebuilt Coils are finely crafted coils twisted with machine-like precision for those that are looking to save time in rebuilding, available in a myriad of advanced configurations for immediate sophisticated RDA set-up. Comes in a pack of (10) ten in a beautiful glass tube.

Triple Fused Clapton Coil

• 28GA*3 + 38GA - Ni80 Material
• Resistance - 0.41ohm
• Parameter - 3mm / 6 Wraps
• Quanity - 10 pcs

Superfine MTL Fused Clapton Coil

• 30GA*2  + 38GA - Kanthal A1 Material
• Resistance - 0.99ohm
• Parameter - 2.6mm / 6 Wraps
• Quantity - 10 pcs

Superfine MTL Fused Clapton Coil

• 32GA*2  + 38GA - Kanthal A1 Material
• Resistance - 1.51ohm
• Parameter - 2.6mm / 6 Wraps
• Quantity - 10 pcs

Superfine MTL Fused Clapton Coil

• 30GA*2  + 38GA - Kanthal A1 Material
• Resistance - 0.99ohm
• Parameter - 2.6mm / 6 Wraps
• Quantity - 10 pcs

Superfine MTL Fused Clapton Coil

• 32GA*2  + 38GA - SS316L Material
• Resistance - 1.03ohm
• Parameter - 2.6mm / 6 Wraps
• Quantity - 10 pcs

Alpha Braid Coil

• 32GA*3 + 40GA - Ni80 Material
• Resistance - 0.3ohm 
• Parameter - 3mm / 6 Wraps
• Quantity - 10 pcs

Fused Clapton Coil

• 26GA*2 + 36GA - Ni80 Material
• Resistance - 0.43ohm
• Parameter - 3mm / 6 Wraps
• Quantity - 10 pcs

Alien Coil

• 26GA*3 + 30GA - SS316L Material
• Resistance - 0.28ohm 
• Parameter - 3mm / 5 Wraps
• Quantity - 10 pcs

Quad Core Fused Clapton Coil

• 28GA*4 + 38GA - Ni80 Material
• Resistance - 0.22ohm 
• Parameter - 3mm / 5 Wraps
• Quantity - 10 pcs

Clapton Helix Coil

• 28GA(A1) 38GA*2 + 26GA*2 - Ni80 Material
• Resistance - 0.3ohm 
• Parameters - 3mm / 6 Wraps
• Quantity - 10 pcs

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.