Hellvape Dead Rabbit MTL 2 22.5mm RTA

Discover the Hellvape Dead Rabbit MTL 2 22.5mm RTA, featuring a single coil postless build deck, integrated juice flow control, and MTL airflow with interchangeable airpins. Adopting a resilient but visually striking stainless steel chassis, the Dead Rabbit MTL 2 can deliver outstanding flavor and vapor from your favorite eJuice or nicotine salts. Accepting up to 30GA wire, the single coil build focuses entirely on flavor development, offering a MTL airflow with adjustable airflow pins to carefully craft the ideal rate of airflow to unlock the complex layers of flavor. In addition, the quarter turn top fill system allows for quick and leak free refills, while integrated juice flow control prevents flooding of the vaporization chamber, letting users adjust the rate of which eJuice enters the chamber. Furthermore, the Dead Rabbit MTL 2 can extend its length, increasing the juice capacity from 2mL to 4mL, making refills last longer.

HELLVAPE DEAD RABBIT MTL 2 22.5MM RTA FEATURES:
• TANK DIAMETER: 22.5mm
• TANK CAPACITY: 2mL | 4mL (w/ Extension)
• FILL SYSTEM: Quarter Turn Top Fill System
• AIRFLOW: Adjustable MTL
• TANK CONNECTION: Threaded 510
• TANK MATERIAL: Stainless Steel
• DRIP TIP: 510 Delrin Drip Tip
• BUILD DECK: Postless
• FASTENING SYSTEM: Phillip Screws
• CONFIGURATION: Single Coil
• Accommodates up to 30GA wire.
• Juice Flow Control
• AIRFLOW: Interchangeable Pins (1.0-2.0mm)

INCLUDES:
• 1 Dead Rabbit MTL 2 RTA
• 7 Airflow Pins (1 Pre-Installed)
• 1 Long Chamber with 4mL Glass
• 1 0.7ohm NI80 Clapton Coil
• 1 Shoelace Cotton
• 1 Accessory Bag
• 1 User Manual
• 1 510 Delrin Drip Tip

AVAILABLE OPTIONS:
• Blue
• Gold
• Gunmetal
• Matte Black
• Matte Full Black
• SS

Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Make sure to properly prime each coils before use.

Warning: Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

Due to the nature of this product. it is not covered by warranty and cannot be exchanged.