The Steam Crave Squonk MOD is an easy-to-use platform to directly bottom-fed atomizers, featuring output power up to 60W, 10mL internal squeeze bottle, versatile temperature control, and a sleek ergonomic form factor. The squonk ready configuration implements an easily accessible reservoir bottle through the milled slot on the side of the device, to direct feed e-liquid into the atomizer for effective and convenient wicking. It is built with an intelligent chipset powered by a single 18650 battery (not included), capable of firing up to 60W, minimum atomizer resistance of 0.1ohm, and temperature control capability. Constructed with a soft ergonomic curve for organic fit and form for user's hand, the Steam Crave Squonk MOD also features a 0.91 Inch OLED screen for instant visibility throughout use. A simple yet highly capable platform, the Steam Crave Squonk MOD is absolutely perfect for users looking for a convenient way to experience rebuildables with all-day capability.
Steam Crave Squonk MOD Features:
- Single 18650 High Amp Battery - Not Included
- Wattage Output Range: 7~60W
- Voltage Output Range: 1~9V
- Min Atomizer Resistance: 0.1ohm
- Temperature Range: 200-600F
- Squonk-Ready Configuration
- 10mL Reservoir Squeeze Bottle
- 0.91 Inch OLED Screen
- Oversized Firing Mechanism
- Two Adjustment Buttons
- Short-Circuit Protection
- Over-Temperature Protection
- Low Voltage Protection
- Battery Protection
- MicroUSB Port
- 510 Connection
- 1 Steam Crave Squonk MOD
- 1 Replacement 10mL Squeeze Bottle
- 1 MicroUSB Cable
- Instruction Manual
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.