The Teslacigs Nano 120W is a finely crafted box mod from Teslacigs, featuring a creative steampunk design, extensive temperature control options, and an innovative taste mode. The Tesla Nano is cast from zinc-alloy and is constructed in a high quality manner to create a hefty but solid box mod. The exterior fascia of this box mod is decorated in a visually striking "steampunk" aesthetic, featuring stylized engravings of various gears, cogs, and sprockets to adhere to the Neo-Victorian look. The innards of this complex box mod feature a proprietary chipset from Teslacigs that allows this box mod to fire at wattages up to 120. However, this chipset also unlocks the extensive temperature control options such as wire resistance matching and temperature control wires. This extensive control allows for minute fine-tuning of each and every draw to create a perfect vaping experience tailored to the user. The taste mode option allows for the user to dial in how the vape ramps up when firing, choosing between a soft, normal, or hard ramp up, or it can be set by the user in a 10s window before the coil produces vapor.
Teslacigs Nano 120W Box Mod Features:
- Dimensions - 90mm by 55mm by 25mm
- Weight: 250g
- Dual High-Amp 18650 Batteries - Not Included
- Teslacigs Proprietary Chipset
- Wattage Output Range: 7-120W
- Maximum Voltage Output: 9V
- Resistance Range - Wattage Mode: 0.1-3.0ohms
- Resistance Range - TC Mode: 0.05-1.0ohms
- Temperature Range: 200°-600°F/100°-300°C
- Ni200, Titanium, Stainless Steel Compatiblity
- Wattage Mode
- Taste Control Mode
- TCR Mode - 3 Memory Profiles
- On/Off Switch
- Bright 0.91″ OLED Screen
- Bottom Hinged Battery Door
- Ergonomic and Intuitive Firing Button
- Two Adjustment Buttons
- Zinc-Alloy Chassis Construction
- Over Puffing Protection
- Low Voltage Protection
- No Atomizer Protection
- Reverse Connection Protection
- Aromizer Short Protection
- Short-Circuit Protection
- Low Resistance Protection
- MicroUSB Port
- Spring-Loaded 510 Connection
- Available in Copper, Brass, Black, Silver
- 1 Tesla Nano 120W Steampunk Mod
- 1 User Manual
- 1 USB Cable
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.