The SnowWolf 200W-C 235W TC Box Mod maintains the illustrious designs of the original while adding an innovative touch mechanism for output adjustments and upgrading the chipset for 235W of maximum wattage and comprehensive temperature control suite. Fundamentally grounded in the original SnowWolf platform, the SnowWolf 200W C maintains a classic trim frame with elegant front and black glass panels for one of the most recognizable aesthetics today. New to the SnowWolf 200W C is the added touch button feature for output adjustment, implementing two arrows for plus/minus buttons while working in synergy with the vibrant OLED matrix for efficient use and a full array of essential data. The integrated chipset is made in conjunction with Sigelei, featuring a maximum output of 235W and full temperature support for Ni200 Nickel, Titanium, and Stainless Steel heating elements. The addition of two memory DIY Mode provides additional user customization, featuring two-memory slots of fine-tuning and adjustments. A stylish magnetized battery cover encloses the two high-amps batteries (sold separately), providing ample long-lasting range while capable output performance.
SnowWolf 235W C TC Mod Features:
- Dimensions: 86mm by 47mm by 24.5mm
- Dual High-Amp 18650 Battery - Not Included
- Wattage Output Range: 10-235W
- Voltage Output Range: 0.5-7.5V
- Temperature Range: 200-600F
- Atomizer Min Resistance: 0.05ohm
- Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
- DIY Mode - Two Memory Slots
- Vintage and Classy Trim Frame
- Black Glass Panels
- Innovative Touch Buttons - Intuive Adjustments
- Intuitive OLED Display Matrix
- Three-Button Operations
- On/Off Device Switch
- MicroUSB Port - Firmware Upgrades
- 24K Gold-Plated Spring-Loaded Pin
- Stainless Steel 510 Connection
- Available in Brass, Copper, Red, Blue
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolong the life of the battery and mod.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.