SMOK SCAR-18 230W Starter Kit

Check out the SMOK SCAR-18 230W Starter Kit, a IP67 rated mod, featuring a 1-230W range, exquisite form factor, and comes with the SMOK TFV9 Sub-Ohm Tank or the SMOK TFV18 Sub-Ohm Tank. Delivering up to 230W of power, the SCAR-18 Mod utilizes a proprietary chipset kept within a zinc-alloy chassis molded into a exquisite form factor. Paired with the SMOK TFV9 Sub-Ohm Tank, the SMOK SCAR-18 230W Starter Kit is sure to be an exemplary kit within your vape collection. Outfitted with a dual high amp 18650 battery bay, the SMOK SCAR 18 Starter Kit will output vapor consistently.

SMOK SCAR-18 230W Starter Kit Features:
IQ-X Chipset
Dimensions - 88mm by 54mm by 30.6mm
Dual High-Amp 18650 Batteries - Not Included
Wattage Output Range - VW Mode: 1-230W
Wattage Output Range - TC Mode: 10-230W
Voltage Output Range: 0.5-8.0V
Resistance Range - VW Mode: 0.10-2.5ohm
Resistance Range- TC Mode: 0.05-2.00ohm
Temperature Range: 200°F-600°F / 100°-315°C
VW Mode
TC Mode
Bypass Mode
Zinc-Alloy Chassis Construction
IP67 Rating - Shock, Dust, Waterproofing
Single Firing Button
0.96" TFT Display Screen
Two Adjustment Buttons
Intelligent Atomizer Recognition
Puff Monitoring System
8 Seconds Cut-off
Short Circuit Protection
Over-Heating Protection
Low-Battery Warning
MicroUSB Port
Available in Fluid 7-Color, Fluid Red, Fluid Blue, Fluid Gold, Fluid Black White, Red Stabilizing Wood, Green Stabilizing Wood, Black

SMOK TFV9 Sub-Ohm Tank Features:
28mm Diameter
6.5mL Tank Capacity
Pyrex Glass Reinforcement
Superior 304 Stainless Steel Tank Chassis
Sliding Top Fill System
SMOK TFV9 Coil Series
0.15ohm V9 Meshed Coil Series
Press Fit Coil Installation
Dual Slotted Airflow Control Ring
510 Connection
Available Rainbow and Black

SMOK TFV18 Sub-Ohm Tank Features:
32mm Diameter
7.5mL Max Capacity
Optional 6.5mL Capacity
Pyrex Glass Construction
Superior 304 Stainless Steel Tank Construction
Top Filling System - Press and Slide
TFV18 Mesh Coil Series
0.33ohm TFV18 Meshed Coils
0.15ohm TFV18 Dual Meshed Coils
Press-Fit Coil Installation
Dual Slotted Bottom Airflow Control Ring
Threaded 510 Connection

Standard TFV9 Package Includes:
1 SCAR-18 Mod
1 5mL TFV9 Tank
2 0.15ohm V9 Meshed Coil
1 Replacement Glass
1 USB Cable
1 User Manual

TFV18 Package Includes:
1 SCAR-18 Mod
1 TFV18 Tank
1 0.33ohm TFV18 Meshed Coil
1 0.15ohm TFV18 Dual Meshed Coil
1 Bulb Glass Tube
1 MicroUSB Cable 
1 User Manual

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.