The SMOK TFV8 Baby V2 Replacement Coils are crafted with dense flavors and massive cloud production in-mind, utilizing a dynamic line-up of mesh cores introduced with the TFV8 Baby V2 Sub-Ohm Tank. The TFV2 Baby V2 Coils are optimized for mid-wattage to high-wattage configurations, offering a spectrum of mesh designs and multitude of holes to accommodate a range of experience. The 0.17ohm Baby V2 A1 Single Coil comes with a large piece of mesh covering the cotton to create a large heating area with a rating range of 90W to 140W. The 0.2ohm Baby V2 A2 Dual Coil implements a cobra mesh design with two heating cores and a wattage setting of 50W to 80W. The 0.15ohm Baby V2 A3 Coil has three separate heating core and a range of 60W to 100W. Comes in a pack of 3.
SMOK TFV8 Baby V2 Replacement Coils Features:
- Performance-Grade TFV8 Baby V2 Coil System
- 0.15ohm Baby V2 S1 Single Mesh Coil
- rated for 40-80W, recommended 60-70W
- 0.15ohm Baby V2 S2 Quadruple Kanthal Coil
- rated for 30-70W, recommended 45-60W
- 0.2ohm Baby V2 K1 Quadruple Coils
- rated for 80-130W, recommended 90-120W
- 0.15ohm Baby V2 K4 Octuple Coils
- rated for 50-110W, recommended 60-80W
- 0.17ohm Baby V2 A1 Single Coil
- rated for 90-140W, recommended 110-130W
- 0.2ohm Baby V2 A2 Dual Coil
- rated for 50-80W, recommended 65W-75W (Stainless Steel)
- rated for 70W-120W recommended 85W-105W (Gold/Rainbow)
- 0.15ohm Baby V2 A3 Triple Coil
- rated for 60-100W, recommended 80W-90W
- Coils Are Available in Gold and Rainbow Colorway
Make sure to properly prime each coils before use.
Warning: These coils are for a Sub-Ohm resistance atomizer and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.
Due to the nature of this product, it is not covered by warranty and cannot be exchanged."