SMOK MORPH 2 230W Box Mod

Shop the SMOK MORPH 2 230W Box Mod, featuring the IQ-S Chipset, dual 18650 batteries (Not Included), and hosts an extensive temperature control suite. Constructed from durable zinc-alloy, the chassis of the MORPH 2 Mod encases the IQ-S Chipset, instilling a rapid firing speed and consistent temperature control options. Compatible with nickel, titanium, and stainless steel wires, the SMOK Morph 2 Mod can be paired with a myriad of tanks and rebuildable atomizer options. Offering up to 230W output, the MORPH 2 Mod utilize its intelligent atomizer recognition to help set the wattage for beginner vapers, while maintaining considerable protections against device failure.

SMOK MORPH 2 230W Box Mod Features:
IQ-S Chipset
Dimensions - 88mm by 47.5mm by 31.7mm
Dual High-Amp 18650 Batteries - Not Included
Wattage Output Range: 1-230W
Voltage Output Range: 1.2-8.2V
Resistance Range - VW Mode: 0.1-2.5ohm
Resistance Range - TC Mode: 0.05-2.0ohm
Temperature Range: 200°F-600°F /100°C-315°C
Nickel, Titanium, and Stainless Steel Wire Compatibility
Firing Speed: 0.001s
Zinc-Alloy Chassis Construction
Intuitive Firing Button
0.96" OLED Display Screen
Two Adjustment Buttons
8s Cut-Off Protection
Atomizer Detection
Over-Heating Protection
Short Circuit Protection
Low Battery Warning
Reverse Polarity
Over-Discharge Protection
Type-C Port
Available in Black, Blue, Red, Brown, Prism Rainbow, White Blue, White Red, Black Carbon Fiber

Includes:
1 MORPH 2 Mod
1 Type-C Cable
1 User Manual

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.