The PURGE MOD Money Shot 30mm RDA is a massively sized atomizer, featuring a gold-plated two post build deck, deep expansive juice wells, and a dual slotted 4mm airflow top cap. The Money Shot RDA is a large 30mm diameter atomizer, with an extensively gold-plated build deck for luxury and better conductivity. The build deck features a dual post build deck with a large open terminal per post, top secured via flathead screws. In addition, the cotton leads can be draped into the 5mm deep juice wells to hold any excess juice, preventing drips and leaks. Furthermore, the top cap features two bored 4mm diameter holes to allow air to gust past the coil configuration to maximize flavor and cloud generation.
PURGE MOD Money Shot 30mm RDA Features:
- 30mm Diameter
- 5mm Deep Juice Wells
- Superior Brass Construction
- Gold-Plated Two Post Build Deck - 5mm by 3mm Terminals
- Top Secured via Flathead Screws
- PEEK Insulator
- Single or Dual Coil Configuration
- Dual 4mm Bored Airflow Top Cap
- 810 ULTEM Widebore Drip Tip
- Solid Copper 510 Connection
- Available in Brass or ULTEM
- 1 Money Shot 30mm RDA
- 1 Allen Key
- 1 Pack of Spare O-Rings
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.