Steam Crave Hadron 30mm RDSA

Check out the Steam Crave HADRON 30mm RDSA, featuring a mesh or traditional coil build deck, series or parallel coil, and a dual airflow control system. Constructed from durable stainless steel, the chassis of the Steam Crave HADRON 30mm RDSA is large and versatile, allowing for both mesh and traditional coil build deck options to be installed. Retaining excess eLiquid in the deep juice wells, the HADRON 30mm RDSA allows for squonking for those that do not enjoy constant dripping. With the traditional coil build deck, builders can install coils in a series or parallel layout to help manifest their dream coil configuration.

Steam Crave Hadron 30mm RDSA Features:
30mm Diameter
Deep Juice Wells
Superior Stainless Steel Construction
Elevated Postless Build Deck - 6 Terminals
Side Secured via Flathead Screws
Dual Coil Configuration - Series & Parallel
Dual Airflow Control Systems - Bottom & Side
810 Widebore Drip Tip
Threaded BF 510 Connection
Available in Black, Silver, Gunmetal

Steam Crave HADRON 30mm MESH RDSA Features:
30mm Diameter
Deep Juice Wells
Superior Stainless Steel Construction
Elevated Postless Build Deck - Clamp Style
Side Secured via Philips Screws
Single Mesh Coil Configuration
Dual Airflow Control Systems - Bottom & Side
810 Widebore Drip Tip
Threaded 510 BF Connection
Available in Black, Silver, Gunmetal

Includes - Regular Vers:
1 HADRON RDSA
1 Spare Bag of O-Rings & Screws
1 Squonk Pins
2 Coils
1 Allen Key
1 Steam Crave Sticker
1 User Manual

Includes - Mesh Vers:
1 Hadron MESH RDSA
1 Spare Bag of O-Rings & Screws
1 Squonk Pin
2 0.15ohm SS316L Mesh Strips
2 0.15ohm KA1 Mesh Strips
2 Mesh Shoelace Cotton
1 Mesh Tool
1 Allen Key
1 Steam Crave Sticker
1 User Manual

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.