Geek Vape AEGIS SQUONK 100W Starter Kit (MDiscontinued)

$62.99
Out of stock
Discover the Geek Vape AEGIS SQUONK 100W Box Mod, deploying an advanced squonk device with intelligent AS-100 Chipset, interchangeable pump section sleeve, while maintaining the shock-proof and waterproof design.
Show More

Discover the Geek Vape AEGIS SQUONK 100W Box Mod, deploying an advanced squonk device with intelligent AS-100 Chipset, interchangeable pump section sleeve, while maintaining the shock-proof and waterproof all AEGIS series are known for. Combining protective silicone and rubberized corners, the Aegis Squonker maintains many of the protective features that are signature to the AEGIS lineage. Reporting an IP67 rating, the Aegis Squonker is shockproof against falls and drops that would otherwise irreversibly damage other mods, while providing a strong sealed exterior to protect against water damage and to make the Geek Vape Aegis Squonker water-resistant. In addition, the Geek Vape Aegis Squonker calls on the advanced AS-100 Chipset, accurately identifying any attached atomizers, rapid and responsive firing times, and allowing the use of atomizers with a resistance as low as 0.05ohm. At the back of the Geek Vape Aegis Squonker Box Mod , an interchangeable squonking section can be swapped to change the squonking backing for the Aegis Squonker into a non-squonking piece, preventing potentially leaky juice to be stored in the back. Paired with the Geek Vape TENGU RDA, the Aegis Squonker will be great, fully utilizing the squonking abilities of the RTA.

Please Note: The interchangeable STANDARD backing is sold separately.

Quick Links:
Geek Vape Aegis SQUONKER 100W Box Mod
Geek Vape Aegis SQUONK Standard Back Cover

Geek Vape Aegis Squonker 100W Box Mod Features:
AS-100 Chipset
Dimensions - 86.4mm by 41.2mm by 31.5mm
Single High-Amp 18650 Battery - Not Included
Wattage Output Range: 5-100W
Resistance Range: 0.05-3.0ohm
Temperature Range: 100°-315°C / 200°-600°F
Power Mode
VPC Mode
TC Mode
TCR Mode
Bypass Mode
Zinc-Aluminium Alloy Chassis Construction
Rubberized Exterior Edge
Single Firing Button
Two Adjustment Buttons
OLED Display Screen
10mL Silicone Squonk Bottle
Interchangeable Squonking Section
10s Cut-Off Protection
Short-Circuit Protection
Over-Charging & Discharging Protection
Over-Heat Protection
Over-Current Protection
Anti-Dry Protection
Spring-Loaded 510 Connection
MicroUSB Port
Available in Black, Gunmetal, Red, Orange, Blue, Green

Geek Vape TENGU 24mm RDA Features:
24mm Diameter
Deep Juice Wells
Superior Stainless Steel Construction
Expansive Build Deck - Singular Elongated Post
4 Terminals - Top Secured via Flathead Screws
Juice Redirection Feature for Dripping Enthusiast
PEEK Insulator
Single or Dual Coil Configuration
Concealed Adjustable Honeycomb Style Airflow
Side to Coil Airflow
810 Widebore PMMA Drip Tip
810 Widebore Delrin Drip Tip
Squonkable BF 510 Pin
Gold-Plated 510 Connection Pin
Available in Black, Golden, Blue, Stainless Steel, Rainbow, and Gunmetal

Includes:
1 AEGIS Squonker 100W Box Mod
1 Tengu 24mm Sub-Ohm Tank
1 Squonking Rear Section
2 0.4ohm N80 Fused Clapton Coil
1 Battery Door Assist Tool
1 Spare Parts Pack
4 Agleted Cotton Strips
1 MicroUSB Cable
1 User Manual

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.

Show Less

Ratings & Reviews

You may also like
Other products from same brand

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.