The Geek Vape TENGU 24mm RDA is an intricately crafted rebuildable dripper, bundling user-friendly spacious build deck for single or dual configurations, multi-hole side airflow control, and squonk functionality. Developed from superior stainless steel, the TENGU RDA measures in at 24mm and possesses a spacious build deck with a single elongated post in the middle bisecting the build deck. Designed for a dual coil configuration, a set of four terminals top secured via flathead screws are used to affix coil leads, tightening to fasten them in place to maintain a reliable connection. In the middle of the long post is a juice drip redirect, allowing for juice dripped through the widebore drip tip to be split between both sets of coil configurations. Along the sides of the top cap are a set of honeycomb airflows, inletting the desired amount of controlled airflow thanks to the concealed airflow restrictor that is part of the airflow system. Airflow rushes in through the sides and is inlet to the side of the coil configuration. At the base of the Tengu RDA is a gold-plated pin that can be swapped out for a gold-plated bottom-fed 510 squonking pin.
Geek Vape TENGU 24mm RDA Features:
- 24mm Diameter
- Deep Juice Wells
- Superior Stainless Steel Construction
- Expansive Build Deck - Singular Elongated Post
- 4 Terminals - Top Secured via Flathead Screws
- Juice Redirection Feature for Dripping Enthusiast
- PEEK Insulator
- Single or Dual Coil Configuration
- Concealed Adjustable Honeycomb Style Airflow
- Side to Coil Airflow
- 810 Widebore PMMA Drip Tip
- 810 Widebore Delrin Drip Tip
- Squonkable BF 510 Pin
- Gold-Plated 510 Connection Pin
- Available in Black, Golden, Blue, Stainless Steel, Rainbow, and Gunmetal
- 1 Geek Vape Tengu 24mm RDA
- 1 Spare Parts Pack
- 1 810 PMMA Drip Tip
- 1 810 Delrin Drip Tip
- 1 GV Triangular Tool
- 2 Feather Cotton
- 1 Hex Wrench
- 2 N80 Fused Clapton Coils
- 1 510 Drip Tip Adapter
- 1 Gold-Plated BF Positive Pin
- 1 User Manual
- 1 Promotional Card
- 1 Warranty Card
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.