Freemax Maxus 2 200W Starter Kit

Check out the Freemax Maxus 2 200W Starter Kit, featuring the new M Pro 3 Tank, extensive temperature control suite, and is powered by a pair 18650 batteries. Constructed from durable zinc-alloy, the chassis of the Maxus 2 Kit delivers a visually striking design and provides the basis for high performance. Paired with the M Pro 3 Tank, the Freemax Maxus 2 Starter Kit can hold up to 5mL of eJuice and is refilled by sliding back the top cap to reveal a single large filling port. In addition, the Maxus 2 Kit can call upon the Maxus Pro 904L M Coils to produce delicious billowy clouds of flavored vapor from your favorite eJuice. Airflow is managed from the base, equipped with two slots to intake the desired amount of air to the center of the coil.

 Freemax Maxus 2 200W Starter Kit Features:
• Dimensions: 89.5mm by 51.9mm by 31mm
• Battery Compatability: 2 x 18650 Batteries - Not Included
• Wattage Range: 5-200W
• Termperature Range: 100°-315°C / 200°-600°F
• Resistance Range: 0.1-3.0ohm
• Power Output: 3 Power Levels
• Display Screen: 1.06" TFT Screen
• Chassis Material: Zinc-Alloy
• Diameter: 28mm
• Widest Point: 28mm
• Glass Capacity: 5mL
• Fill System: Sliding Top Cap
• Tank Material: Stainless Steel
• Coil Series: Freemax Maxus Pro 904L M Coils
• Coil Installation: Threaded
• Low Resistance Protection
• Short Circuit Protection
• Open Circuit Protection
• 10s Overtime Protection
• High-Temp Protection
• Low Voltage Protection
• Hinged Battery Door
• Intuitive Firing Button
• Two Adjustment Buttons
• Locking Switch
• Charging: Type-C Port

Includes:
• 1 Maxus 2 200W Mod
• 1 M Pro 3 Tank
• 1 0.15ohm M1-D Mesh Coils
• 1 0.2ohm 904L M2 Mesh Coils
• 1 5mL Glass Tube
• 1 Type-C Cable
• 1 Silicone Ring
• 1 User Manual
• 1 Warning Card
• 1 Warranty Card
• 1 Dessicant Packet

Available Options:
Black, Blue, Gunmetal, Rainbow

WARNINGS:
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.