Hohm Tech Onyx OHM 2A Matrix Display Charger

Check out the Hohm Tech Onyx OHM 2A Matrix Display Charger, featuring a 2-Bay configuration, 2A combined charging power, and HPSC microcomputer monitoring. Equipped with a pair of charging bays, the Onyx Ohm Matrix Display Charger can charge at 2A speeds, split between the 2 bays. Inspired by Battery Electric Vehicles, the Onyx Ohm Charger displays real-time charging status to give the user a better idea of the performance and useabilities of the batteries.

Hohm Tech Onyx OHM 2A Matrix Display Charger Features:
2-Bay Charger
Light Bleed Shielded Screen
HPSC Microcomputer
4.2V Voltage Detection Circuit
Charge Rate: 2A Combined (1A Per Slot)
Battery Size Compatibility: 34-73mm
Real-Time Charge Status
Real World Charge Status
PCB/PCM Compatible Cells
Autonomous USB IPR System
PWM Control Technology
Low Voltage Battery Pre-Conditioning
DC Overload
Overcharge Prevention
Reverse Polarity Protection
Cell Fault Detection
CE, ROHS, FCC, Air/Sea Transport, PLI

To ensure your safety and maintain the battery’s life and durability, we recommend you follow these rules:

Do not over-discharge or overcharge the battery. Doing so will shorten the battery’s life and sometimes, it can make it pop or leak.
Please do not short circuit or it will release massive current.
Do not play with fire! Do not dispose any kind of battery in or near any fire.
Do not stack more than one battery as it may potentially blowout and cause serious damage to yourself and place.
Always check battery’s condition to see if there are signs of wear and tear. If there is, please dispose the battery.
Do not dispose batteries into the trash as it is against the state’s laws.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.