The Wotofo Warrior 25mm RDA is a masterpiece made in collaboration with JMT Elite, featuring a clamp-style two-post build deck, Multihole Beehive Style Airflow, and the option to pair with today's popular squonk mods. JMT Elite is a team of respected builders within the vaping community, working together with the manufacturing prowess of Wotofo to create a sensational vape RDA. The build deck has two posts bisecting the base with a dual coil terminal clamp per post. Coil leads are placed onto the open terminal shelf between the clamp section, top-secured via Phillips screws for a consistent contact. The adjustable airflow system is accessible by rotating the 33-hole drilled sleeve, creatively aiming directly into the coil for a sophisticated cooling properties. The 24K gold-plated squonk pin comes with the atomizer, allowing for a squonkable box mod to reach its full potential along with a spare bags of prebuilt coils, cottons, and parts.
Wotofo Warrior 25mm RDA Features:
- Made in Collaboration with JMT Elite
- 25mm Diameter
- Deep Juice Well
- Superior Stainless Steel Construction
- Domed Top Cap Design - Flavor Enhancement
- Spacious Build Deck
- Clamp-Style Two-Post Design
- Top Secured via Phillips Screws
- Single or Dual Coil Configuration
- PEEK Insulator - Made in Germany
- Dual Multi-Hole Beehive Style Airflow - Fully Adjustable
- 810 Resin Widebore Drip Tip
- 810 Delrin Widebore Drip Tip
- 510 Drip Tip Adapter
- Gold-Plated Squonk BF 510 Pin
- Gold-Plated 510 Connection
- Available in Blue, Rainbow, Gold, Gunmetal, Stainless Steel, Black
- 1 Warrior RDA
- 1 Spare 810 Drip Tip
- 1 510 Drip Tip Adapter
- 1 Single Coil Block
- 1 Bag of Prebuilt Coils
- 1 Set of Agletted Japanese Cotton
- 1 Spare Parts Bag
- 1 Instructional Manual
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.