The Wotofo Profile 24mm RDA is made in collaboration with Mr.JustRight1 to create a highly innovative rebuildable dripping atomizer focusing on flavor featuring an advanced build deck, unique spring-loaded ceramic cotton support system, and a beehive style top cap airflow. Designed in conjunction with Mr. Just Right 1, an avid vape proponent, the Wotofo Profile RDA has an innovative build deck. The build-deck has two posts, side secured via hex screws, these clamps ensure a tight connection for small builds, mesh sheets, or thick coil lead builds, firmly holding them in place. The ceramic cotton support system is spring-loaded, to counter gravity, to ensure firm contact between the mesh sheet and wicked cotton. Furthermore, the beehive style top cap forces in air from the top side inlets and gusts it past the coils for pronounced flavor production with depth.
Wotofo Profile 24mm RDA Features:
- Collaboration between Mr. Just Right 1
- 24mm Diameter
- Deep Juice Well
- Superior Stainless Steel Construction
- Spacious Build Deck
- Wide Clamp Style Ceramic Support
- Side Secured via Hex Screws
- Wide Terminals for Larger Builds or Leads
- Single or Dual Coil Configuration
- Spring-Loaded Ceramic Cotton Support
- Beehive Style Air Slots on Top Cap
- Detachable Structure
- 810 Widebore Resin Driptip
- Gold-Plated 510 Connection
- Available in Stainless Steel, Black, Blue, Gunmetal, Gold, Rainbow, Aluminum Blue, Green, Purple, Frosted Black, Frosted Clear, ULTEM
- 1 Wotofo Profile 24mm RDA
- 1 User Manual
- 1 6mm Agleted Cotton Strip
- 1 Extra 810 Drip Tip
- 1 Bending Tool
- 1 Clapton Coil
- 1 Mesh Style Coil Sheets
- 1 Bag of O-Rings and Screws
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.