The Wismec Sinuous FJ200 TC Box Mod is the performance output system following the wildly popular Predator 228 and RX GEN3, presenting a classy yet modern chassis with an integrated 4600mAh Internal Dual Battery. Designed with inspiration of the Predator 228, the Sinuous FJ200 Box Mod is developed with a vertical based design with an updated 510 connection that can fit up to 28mm. Built into the chassis is a hidden firing bar that matches symmetrically to the entire structure, fully enabled when users squeeze the device. Two adjustment button is positioned directly below the large 1.3 Inch OLED display, neatly organized with live readouts of performance levels and battery life meters. The Sinuous FJ 200 is powered by a 4600mAh Internal Dual Battery with Dual Circuit Protection and Temperature Protection System for safer charging. The internal chipset is capable of firing up to 200W with a maximum output current of 50A and a full suite of temperature control setting with TCR adjustments.
Wismec Sinuous FJ200 TC Box Mod Features:
- Dimensions: 123.4mm by 45mm by 29mm
- Integrated 4600mAh Internal Dual Battery
- Wattage Output Range: 1-200W
- Voltage Output Range: 0.5-9V
- Maximum Output Current: 50A
- Minimum Atomizer Resistance: 0.05ohm
- Temperature Control Range: 200-600F
- Ni200, Titanium, and 316 Stainless Steel Compatibility
- TCR Adjustments
- Ergonomic Centralized Contour
- Modernized Design
- Stealth Firing Bar - Squeeze to Fire
- Intuitive 1.3 Inch OLED Display
- Adjustment Buttons Below Screen
- Temperature Protection System for Safer Charging
- Dual Circuit Protection
- MicroUSB Port - 2A Maximum
- Stainless Steel 510 Connection
- 1 Sinuous FJ200 Box Mod
- 1 MicroUSB Cable
- Instructional Manual
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.