The Wismec LUXOTIC DF 200W TC Starter Kit is a vaping powerhouse set-up, presenting a sturdy zinc-alloy chassis construction, integrated 7.0mL silicone squonk bottle, and is paired with the Guillotine V2 RDA for an exquisite vaping experience. The LUXOTIC DF BOX utilizes the body shape and design similar to the RX GEN3, incorporating an oversized firing button over the 1.3" OLED Display Screen for an intuitive layout that is easy to access and use. In addition, the Luxotic DF Squonk Mod hosts an internal 7.0mL silicone squonk bottle where the third battery used to go for older layouts, perfect for those that enjoy the ability to juice the dripper on-the-go without needing any auxiliary equipment. The Guilllotine V2 RDA is a great rebuildable squonk dripper, measuring in at 24mm and including a build-friendly quad terminal deck, bottom and side dual airflow control, and an optional gold-plated squonker pin for those that want to access the full potential of the Luxotic DF.
Wismec Luxotic DF 200W TC Squonk Mod Features:
- Dimensions - 77.2mm by 54.5mm by 42.1mm
- Weight - 190g
- Dual High-Amp 18650 Batteries - Not Included
- Wattage Output Range: 1-200W
- Resistance Range: 0.05-3.0ohm
- Zinc-Alloy Chassis Construction
- Oversized Firing Button
- Two Adjustment Buttons
- 7.0mL Integrated Squonk Bottle Capacity
- 1.3" OLED Display Screen
- Bottom Hinged Battery Door
- Over-Charge Protection
- Over-Discharge Protection
- Over 10s Protection
- Short-Circuit Protection
- Over-Current Protection
- Reverse Polarity Protection
- Temperature Protection
- MicroUSB Port
- Spring-Loaded 510 Connection
- Available in Black, Green, Blue, White
Wismec Guillotine V2 RDA Features:
- 24mm Base Diameter
- Optional 25.5mm Decorative Ring Base
- 6mm Deep Juice Well
- Superior Stainless Steel Construction
- Horizontal Two-Post Build Deck
- Top Secured via Hex Screws
- Single or Dual Coil Configuration
- Dual Slotted Airflow Control - Side or Bottom
- 810 Resin Widebore Drip Tip
- Optional 810 ULTEM Drip Tip
- Squonk-Ready Bottom-Feeding 510 Pin
- Spring-Loaded 510 Contact Pin
- 1 Luxotic DF 200W Box Mod
- 1 Guillotine V2 RDA
- 1 7.0mL Squonk Bottle
- 1 Cotton
- 1 Mouthpiece
- 2 0.28ohm Clapton Coil
- 1 QC MicroUSB Cable
- 1 Spare Parts
- 1 Warning Card
- 2 User Manual
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.
|Color||Black, Blue, Green, White|