The LittleFoot 22mm MTL RTA is the result of collaborative effort between Bruce Pro Innovations and Wake Mod Co., introducing this 22mm diameter mouth to lung tank, featuring an elevated postless build deck, 2mL capacity glass tank, and an innovative airflow delivery system that is sure to set this atomizer apart from other rebuildable tank atomizers. Constructed from superior stainless steel, this RTA features a hardened stainless steel elevated build deck with no posts, top secured via flathead screws for open terminals at each end. This allows for bigger or exotic coil configurations. Within the build deck is a set of 4 airflow exits that ventilate the drawn air directly to the bottom of the coil. In addition, the 2mL capacity tank is top filled via a threaded top cap to reveal two large fill ports. Furthermore, the bottom airflow control ring features a set of three sized airholes bored into the control ring, Measuring in at 0.5mm, 1.5mm, and 2.0mm, the appropriate airflow can be chosen to suit the user's preferred method.
Wake Mod Co. x BPI LittleFoot 22mm MTL RTA Features:
- Collaboration between Wake Mod Co. & Bruce Pro Innovations
- 22mm Diameter
- 2mL Juice Capacity
- Superior Stainless Steel Construction
- Pyrex Glass Reinforcement
- Elevated Postless Build Deck - Two Open Terminals on Each Side
- Top Secured via Flathead Screws
- Positive PEEK Insulation
- Single Coil Configuration
- Detachable Structure
- Threaded Dual Ported Fill System
- Quad Bored Airflow Vents Underneath Coil Structure
- Single Bored Airflow Inlet - 3 Size Options - 0.5mm, 1.5mm, 2.0mm
- 4mm Bore Acrylic Drip Tip
- Available in Black, Blue, Gold, and Red
- 1 Wake Mod Co. x BPI Littlefoot 22mm MTL RTA
- 1 Spare Glass Tube
- 1 Spare Parts Kit
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.