VOOPOO DORIC 20 Pod System

Check out the VOOPOO DORIC 20 Pod System, featuring an integrated 1500mAh battery, 3 power levels, and uses the IPO Pod with ITO Coil Support. Constructed from durable zinc-alloy, the chassis of the DORIC 20 Pod System is lightweight and portable, adopting a slim pen-style vape. Equipped within the chassis is an integrated 1500mAh battery, offering plenty of power to fire the ITO Coils installed within the IPO Pod. Utilizing a mesh heating element, the coil and pod combination will allow for delicious flavor and vapor from your favorite eJuice or nicotine salt, holding up to 2mL in the IPO Pod. Quick charging from the Type-C USB Port, the VOOPOO Doric 20 is perfect for those that are on-the-go, easily stored in the pocket, purse, or backpack and can be recharged for all day use.

VOOPOO DORIC 20 Pod System Features:
Dimensions - 124mm by 19mm Diameter
Integrated 1500mAh Battery
Wattage Output Range: 8-18W
Resistance Range: 0.7-1.2ohm
3 Power Levels
Zinc-Alloy Chassis Construction
Intuitive Firing Button
2mL IPO Pod
Side Fill System - Silicone Stoppered
VOOPOO ITO Coil Series
1.0ohm ITO-M2 Mesh Coil - rated for 10-14W
1.2ohm ITO-M3 Mesh Coil - rated for 8-12W
Press Fit Coil Installation
Magnetic Pod Connection
Type-C USB Port
Available in Light Grey, Ice Blue, Olive Green, Pale Gold, Rose Gold

Includes:
1 Doric 20 Device
1 2mL IPO Pod
1 1.0ohm ITO-M2 Coil
1 1.2ohm ITO-M3 Coil
1 Type-C Cable
1 User Manual

Make sure to properly prime each coils and pods before use.

Warning: If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.