Vaporesso TARGET PM30 Pod Mod Kit

Discover the Vaporesso Target PM30 Pod Mod Kit, featuring an integrated 1200mAh rechargeable battery, 3 tiered power output, and can accept coils from the Vaporesso GTX Coil Series. Holding up to 3.5mL within the pod, the PM30 Pod Mod Kit can be refilled by sliding back the drip tip to reveal the innovative Push To Fill system, eliminating the potential for leaks. Operating from a three tiered power output, the Target PM30 Pod Mod Kit can output between 8-25W, depending on the output level selected and the type of coil installed. Saving considerable amount of power from the lack of a screen, the Target PM30 relies on a LED Indicator Light. Furthermore, the Target PM30 Pod Kit is powered by a strong 1200mAh integrated battery, allowing recharging to occur through the MicroUSB Type-C Port.

Vaporesso TARGET PM30 Pod Mod Kit Features:
Dimensions - 117.1mm by 26.7mm by 22mm
Integrated 1200mAh Rechargeable Battery
Wattage Output Range: 8-25W
3 Power Levels - Low, Medium, High
Zinc-Alloy Chassis Construction
Intuitive Firing Button
LED Indicator Light
3.5mL Refillable Pod Capacity
Sliding Top Fill System - Push To Fill (PTF) Port
Vaporesso GTX Coil Series
0.6ohm GTX Mesh Coil - rated for 20-30W
1.2ohm GTX Regular Coil - rated for 8-12W
Press Fit Coil Installation
Magnetic Pod Connection
MicroUSB Type-C Port
Available in Red, Green, Black, Silver, Blue, Purple

Includes:
1 Vaporesso TARGET PM30 Battery
1 TARGET PM30 Pod
1 0.6ohm GTX Mesh Coil
1 1.2ohm GTX Regular Coil
1 USB Type C Charging Cable
1 User Manual
1 Warranty Card
1 Reminder Card

Make sure to properly prime each coils and pods before use.

Warning: If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.