The Vaporesso LUXE NANO 80W Starter Kit provides the ultimate compact vape mod system, integrating an internal 2500mAh battery with the intelligent OMNI Board 4.0 Chip to pair with the dynamic mesh/flax coil system of the SKRR-S Mini Tank. Maintaining the elegant structural chassis of the original LUXE 220W, the LUXE NANO implements a stunning 1.3" TFT Screen measuring edge-to-edge controlled via touch-sensitive buttons with haptic feedback. The Vaporesso LUXE NANO Box Mod utilizes the OMNI Board 4.0 chipset resulting in an ultra fast firing speed of 0.001s and comes with a slew of protections. In addition, the chipset has passthrough technology to allow for use while charging as it halts the charging to fire, with a 2A Max Charge rate. Furthermore, the LUXE NANO is a sleek and beautiful mod, aesthetically pleasing with the rounded corners and beveled edges to accentuate the flowing lines. The dynamic kit comes paired with the SKRR-S Mini Sub-Ohm tank, implementing a 720° threaded top fill system, dual slotted bottom airflow control ring, and is adapted to all GT Coils, QF Strip, and QF Meshed Coils.
Vaporesso QF Replacement Coils
Vaporesso LUXE NANO 80W Box Mod Features:
- Dimensions - 122.85mm by 40.3mm by 26.2mm (Includes Tank)
- Integrated 2500mAh Rechargeable Battery
- Wattage Output Range: 5-80W
- Resistance Range: 0.03-5.0 Ohm
- Other Modes: Smart VW(H/N/S) / VT(SS, NI, TI) / CCT / CCW / VV / CCV
- TCR Adjustment - 2 Memory Modes
- Super Player Mode - Broad Tank Resistance ID
- OMNI Board 4.0 Chipset - 0.001s Insta-Fire
- 1.3" TFT Full Color Display
- Large Side Fire Button Operation
- Vibration-Enabled Adjustment Buttons
- Short Circuit Protection
- Burn Protection
- No Load Protection
- Overtime Protection
- Low Resistance Protection
- Low Power Protection
- Overcharge Protection
- ESD Circuit Protection
- Pass Through Protection
- MicroUSB Port - 2A Max Charge
- Centered 510 Stainless Steel Connection
- Available in Black, Blue, Red, Bronze, Rainbow, and Silver
Vaporesso SKRR-S Mini Sub-Ohm Tank Features:
- 3.5mL Bubble Juice Capacity
- Superior Stainless Steel Construction
- Pyrex Glass Reinforcement
- Knurled and Threaded Top Fill System
- Vaporesso QF Coil System
- 0.2ohm QF Meshed Coil
- 0.15 QF Strip Coil
- Adapted for all GT Coils
- Knurled Dual Slotted Bottom Airflow Control Ring
- QF Coil Bullet-Shaped Internal Structure Prevents Spitback and Gives Better Flavor
- 510 Connection
- Available in Black, Stainless Bronze, Rainbow, Blue, Red
- 1 LUXE NANO 80W Mod
- 1 SKRR-S Mini Tank
- 1 0.15ohm QF Strip Coil
- 1 0.2ohm QF Meshed Coil
- 1 Replacement Glass Tube
- 1 Silicone Case
- 1 O-Ring
- 1 MicroUSB Cable
- 1 User Guide
- 1 Warranty Card
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.