WARNING: This product contains nicotine. Nicotine is an addictive chemical.
The Vandy Vape PULSE DUAL 220W Squonk Starter Kit is a monumental creation made in collaboration with Tony B., fully upgrading to a high-power 220W maximum squonk mod within a compact form factor to pair with the Pulse V2 RDA. The Vandy Vape PULSE DUAL 220W Box Mod is one of the smallest dual 18650 squonk device to-date, encompassing a conveniently located 7mL squonk bottle section made in conjunction with ergonomic designs such as firing mechanism and adjustment buttons placements. The internal Vandy Chip is highly advanced, powered by dual 18650 vape batteries (sold separately) to fire up to 220W with a myriads of output option such as POWER, BYPASS, Voltage, and full Temperature Control Mode. Accompanying the PULSE DUAL is the new Vandy Vape Pulse V2 BF RDA, measuring 24 in diameter, 2mL eJuice capacity, unique floating build deck design, and three different airflow control rings. The entire collection caters towards dedicated builders looking for a high-performance squonk kit with modernized functionalities and designs for today's vaping needs.
Quick Links:
Vandy Vape Pulse DUAL BF Bottle (7mL)
Vandy Vape Pulse V2 RDA
Vandy Vape Pulse Dual 220W Box Mod Features:
Collaboration with Tony B. - The Vapor Trail
Dimensions - 75.3mm by 52.9mm by 41.7mm
7mL Chubby Squonk Bottle
Dual High-Amp 18650 Battery - Not Included
Top-Grade IC Vandy Chip
Wattage Output Range: 5-220W
Voltage Output Range: 0.5-8V
Resistance Range - Temperature Control: 0.05-1.5ohm
Resistance Range - Variable Wattage: 0.05-3.0ohm
Temperature Range: 200°-600°F/100°-315°C
Supports Ni200, Titanium, and Stainless Steel
Temperature Control Mode
POWER Mode
BYPASS Mode
Voltage Mode
Intuitive Display Screen
Interchangeable Panels
Intuitive Trigger-Style Firing Button
Two Adjustment Buttons
Bottom-Loaded Hinge Battery Door
Overheating Protection
Open Circuit Protection
Short Circuit Protection
Overcurrent Protection
Overtime Protection - 10 Seconds Cut-Off
Low-Battery Warning
Battery Management System
MicroUSB Port
Spring-Loaded 510 Connection
Available in Black, Red, Green, Blue, Camouflage Yellow, Pigment Orange, Lattice Black, Stripy Green
Vandy Vape Pulse V2 BF RDA Features:
Collaboration with Tony B
24mm Diameter
2mL Deep Juice Well
Superior Stainless Steel Construction
Floating Build Deck Design - Optimized for Squonk
Four-Post Design
Top-Side Secured via Hex Screws
Single or Dual Coil Configurations
Direct-to-Coils Side Airflow Design
Three Different Airflow Control Rings - PEI Material
Single Airslot Design
Six-Hole Airslots - Single Coil Option
Six-Hole Airslots - Dual Coil Option
810 PC Widebore Dip Tip
Bottom-Feed 510 Squonk Pin
Stainless Steel 510 Connection
Includes:
1 PULSE DUAL 220W Mod
1 Pulse V2 BF RDA
3 Airflow Control Ring
1 Accessory Bag
1 Instructional Manual
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.
New customer? Start Here.
NEW
BRANDS
STARTER KITS
DISPOSABLES
E-LIQUIDS
TANKS & RDA
HEMP
VAPORIZERS
GLASS
ACCESSORIES
Uwell
VOOPOO
SMOK
Geek Vape
Vaporesso
VOOPOO
SMOK
UWELL
Pod Juice
Pillow Talk
Geek Bar
WOOFR
Finest E-Liquid
Pod Juice
Monster Vape Labs
Humble Juice Co
UWELL
Vandy Vape
HellVape
FreeMaX
Hidden Hills
TRE House
GRDNT
STIIIZY
YoCan
PAX Labs
Hamilton Devices
PuffCo
MJ Arsenal
Puffco
GRAV Labs
EYCE
Nitecore
Hohm Tech
UWELL
Efest