Vandy Vape MESH V2 25mm RDA (Discontinued)

Check out the Vandy Vape Mesh V2 25mm RDA, a mesh heating element rebuildable atomizer, incorporating a postless build deck, clamp style fastening system, and features a dual slotted top airflow control system. Constructed from durable stainless steel, the Vandy Vape Mesh V2 RDA is visually striking and features a postless build deck. Equipped with a clamp style fastening system, the clamps are tightened by a pair of side secured Phillips screws. Intended for mesh heating elements, the clamp system can also be used with generic prebuilt round wire coils as well. At the top of the midcap is a multihole airflow control ring, adjustable by turning the knurled top cap control ring. This allows the user to completely control the airflow running through the build deck and coil assembly within the rebuildable dripping atomizer.

Quick Links:
Vandy Vape M Mesh Sheet Coils

Vandy Vape Mesh V2 RDA Features:

• 25mm Diameter
• 2mL Deep Juice Wells
• 304 Superior Stainless Steel Tank Construction
• Knurled Adjustable Top Airflow Control Cap
• Multi Hole Airflow Mid Cap
• Postless Build Deck - Spring Loaded Clamps
• Side Secured via Phillips Screws
• Ceramic Middle Cotton Lift
• Single Mesh Coil Configuration
• PEEK Insulator
• Vandy Vape Mesh Coil Series
• 0.15ohm A1 Dual M Coil - rated for 45-70W
• 0.15ohm Ni80 M Coil - rated for 55-70W
• 0.15ohm A1 M Coil - rated for 50-65W
• 0.12ohm SS316L M Coil - rated for 50-70W
• Round Wire Coil Compatible
• Threaded 510 Connection
• 810 Widebore Resin Drip Tip
• Available in Matte Black, SS, Gold, Gunmetal, Shiny Blue, Rainbow, Frosted Grey

Includes:

• 1 M V2 RDA
• 1 Squonk Pin
• 1 Spare Parts Bag
• 1 Instruction Manual
• 1 Vape Cotton Laces
• 1 0.15ohm Kanthal M Coil
• 1 0.15ohm Ni80 M Coil
• 1 0.15ohm Dual M Coil
• 1 0.15ohm SS316L M Coil

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.