The Berserker MTL RDA by Vandy Vape is made in collaboration with Alex from VapersMD, presenting a dynamic mouth-to-lung rebuildable dripper with user-friendly build deck and interchangeable internal airflow slots. The Berserker MTL RDA is brilliant constructed with a beautiful metal sleeve contrasted with the ULTEM drip tip, featuring a 9mm deep juice well. The build deck implements a two-post, single terminal design where coil leads are placed under the flathead screws and properly top-secured. Like most MTL structures, the airflow system is quite important. The Berserker RDA implements an interchangeable airslots with six different type of sizes ranging from a 3.1mm by 0.5ohm, triple 1mm airslots, and single 1.2mm/1.4mm/1.6mm/2mm airslot. The exterior airflow integrates six laser-etched airflow holes for a wide range of adjustments.
Berserker MTL RDA by Vandy Vape Features:
- 18.1mm Base Diameter
- 22mm/24mm Optional Ring
- 9mm Deep Juice Well
- Superior Stainless Steel Construction
- Metal Protective Sleeve
- Two-Post, Single Terminal Build Deck
- Top-Secured via Phillips Screws
- PEEK Insulator
- Single Coil Configuration
- Side Airflow Control - 6 Airslot Sizes - 0.5mm,1.2mm, 1.4mm, 1.6mm, 2.0mm
- Interchangeable Internal Airflow - 6 Airslot Sizes - Triple 1mm, Single 1.2mm/1.4mm/1.6mm/2.0mm, 3.1mm by 0.5mm
- ULTEM MTL Drip Tip
- Squonk-Ready BF 510 Pin
- Gold-Plated 510 Contact Pin
- 1 Berserker MTL RDA
- 1 22mm Base Ring
- 1 24mm Base Ring
- 6 Interchangeable Internal Airflow Pieces
- 1 Accessory Bag
- Spare Parts & O-Rings
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.