Uwell Crown B 35W Pod System

Check out the Uwell Crown B 35W Pod System, offering an integrated 1150mAh battery, PA coil compatibility, and can hold 3.5mL inside the Crown B Pods. Constructed from drop-resistant zinc-alloy, the chassis fits neatly within the hand and encapsulates a 1150mAh battery. Rechargeable via Type-C Port and cable, the Crown B Pod System can deliver up to 35W in a triple tiered output system that is relayed via colored lighting. With built-in adjustments via power dial and airflow switch, the Crown B is incredibly versatile, working seamlessly with nicotine salts and freebase eJuice. Outfitted with a 0.3ohm or 0.8ohm PA coils, the Crown B can be used for MTL or DL vaping, satisfying all vaper with delicious flavored vapor.

Uwell Crown B 35W Pod System Features:
• Dimensions: 92mm by 42mm by 18mm
• Battery Capacity: 1150mAh
• Wattage Range: 13-35W
• Power Output: 3-Tiered
• Resistance Range: 0.3-0.8ohm
• Chassis Material: Zinc-Alloy
• Charging: Type-C Port
• Operation: Button-Activated
• Power Output Indicator Lighting
• Battery Level Indicator Lighting
• Pod Series: Crown B Pods
• Fill System: Side Fill
• Pod Material: PCTG
• Pod Capacity: 3.5mL
• Pod Connection: Magnetic
• Coil Installation: Press Fit
• Coil Support: PA Coils
• Airflow: Pod-Based Sliding Switch
• 510 Drip Tip

Includes:
• 1 Crown B Device
• 1 Crown B Pod
• 1 0.3ohm PA Coil
• 1 0.8ohm PA Coil
• 1 User Manual
• 1 Type-C Cable
• 2 510 Drip Tips

Available Options:
Iron Gray

WARNINGS:
Make sure to properly prime each coils and pods before use.

If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.

Element Vape provides Product Information that includes, but is not limited to, technical specifications, recommendations, and other materials for Customer’s convenience in Customer’s selection of Products. The accuracy or completeness of Product Information is not guaranteed and is subject to change without notice.