The Uwell Crown 4 IV 200W TC Box Mod is a premier advanced vape system, presenting a high-end design impression with an all new proprietary chipset and a wattage range spanning from 5-200W. The Uwell Crown 4 Box Mod utilizes a proprietary chipset to receive a near-instantaneous firing speed and allows the Crown 4 box mod to achieve wattages of up to 200W. Externally, the Uwell Crown 4 Box Mod sports a luxurious side panel designs, featuring a slew of graphics centered around a central Crown emblem. Furthermore, the Crown 4 can reach wattages of up to 200W but as low as 5W for all types of atomizers and tanks.
Uwell Crown 4 IV 200W TC Box Mod Features:
- Dimensions - 138.8mm by 52.5mm by 25mm (w/ Tank)
- Proprietary Chipset
- Dual High-Amp 18650 Batteries - Not Included
- Wattage Output Range: 5-200W
- Voltage Output Range: 0.7-8.0V
- Resistance Range: 0.1-3.0ohm
- Temperature Range: 100°-315°C / 200°-600°F
- Power Mode
- TC Mode
- Superior Zinc-Alloy and Stainless Steel Chassis Construction
- Intuitive Firing Button
- Two Adjustment Buttons
- MicroUSB Charging
- 510 Connection
- Available in Blue, Red, Silver, Gold, Green, Purple
- 1 Crown IV 200W Box Mod
- 1 MicroUSB Cable
- 1 Instructional Manual
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.