The USV MACH ON3 240W Squonker Starter Kit is a great mod with plenty of capabilities, featuring the advanced VO TECH 240W Chipset, a full range of temperature control options, and a 8.0mL squonking bottle. The USV MACH ONE Box Mod is technologically advanced, using the VO TECH 240W chipset to unlock the potential to fire at a whopping 240W, an extremely high wattage reserved for only the most advanced vaping devicies. Powered by dual 18650 (sold separately), the MACH ON3 can utilize the extensive temperature control suite, supporting NiChrome, Titanium, and Stainless Steel wire options. The included 8.0mL squonking bottle sits alongside the battery bay, saving crucial space within the design for ergonomic purposes and provide support with today's top squonk BF RDAs.
USV MACH ON3 240W Squonker Box Mod Features:
- Weight - 453g
- 8mL Capacity Squonk Bottle
- Dual High-Amp 18650 Batteries - Not Included
- VO TECH 240W Chipset
- Wattage Output Range: 5-240W
- Voltage Output Range: 1V-8.4V
- Resistance Supported: 0.1-2.0ohm,
- Temperature Control Range: 93°-315°C / 200°-600°F
- Extensive Temperature Control Suite
- Ni200, Ti, Stainless Steel Compatibility
- Zinc-Aluminium Alloy Chassis Construction
- Carbon Fiber Accents
- 1.3" TFT Colored Screen
- Intuitive Firing Button
- Beveled Edges
- Two Adjustment Buttons
- Locking Bottom Hinged Battery Door
- Customizable User Interface
- Low/High Voltage Protection
- Low/High Amperage Protection
- Short Circuit Protection
- Low/High Resistance Protection
- High PCB Temperature Protection
- MicroUSB Charging Port
- Spring-Loaded Squonk BF Pin
USV MACH ON3 BF RDA Features:
- 25mm Diameter
- Superior Stainless Steel Construction
- Spacious Build Deck
- Two-Post, Single Terminal Design
- 3mm Terminal Post Openings
- Top-Secured via Knurled Slotted Screws
- Single or Dual Coil Configurations
- Dual Three-Slotted Side Airflow Control
- ULTEM Widebore Drip Tip
- Squonk BF 510 Pin
- Gold-Plated 510 Connection
- 1 USV Mach On3 240W Box Mod
- 1 Mach On3 RDA
- 1 8mL Squonk Bottle
- 1 Spare Parts and Tools
- 1 MicroUSB Cable
- 1 User Manual
- 1 Warranty Card
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.