A lightweight, high-performance system made in collaboration between United Society of Vape and VO Tech, the USV ARC 240 presents a timeless design piece with 240W of maximum power and a robust temperature control suite. The entire design of the USV ARC 240W is made of a lightweight ABS construction with a colorful stripe inlay for a striking impression. The ARC 240 integrates the new VO240 Chipset with 32-bit ARM Processor for rapid ramp-up time and plethora of functionalities such as full temperature control, power curves adjustment, and BYPASS mode. Destined to be a vintage box mod design.
USV ARC 240 TC Box Mod Features:
- Dimensions - 86.5mm by 61.3mm by 30mm
- United Society of Vape and VO Tech Collaboration
- VO240 Chipset - 32-bit ARM Processor
- Dual High-Amp 18650 High-Amp Battery - Not Included
- Wattage Ouput Range: 5-240W
- Minimum Atomizer Resistance: 0.03ohm
- Temperature Control Range: 200-600F
- Ni200 Nickel , Titanium, and Stainless Steel Compatibility
- Output Modes - Normal, ECO, Sports
- BYPASS Mode
- Power Curve Adjustments
- Lightweight ABS Construction
- Intuitive 0.91" OLED DIsplay
- Bottom-Loaded Hinged Battery Door
- Low Battery Voltage Protection
- Low Resistance Protection
- Reverse Polarity Protection
- Short Circuit Protection
- MicroUSB Port
- Spring-Loaded Gold-Plated 510 Connection
- 1 USV ARC 240 Mod
- 1 Collector's Dice
- 1 MicroUSB Cable
- Instructional Manual
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.