The Springer S RTA by Tigertek is the rebuildable upgrade from the original Springer RDA, presenting a flavor-focused single coil configuration two-post build deck with Screwless Coil building system. Measuring 24mm in base diameter, the Springer S RTA features a standard 2mL glass with the option of increasing the juice capacity to 3.5mL with the provided bubble glass tube. Constructed for a flavor-orientated structure, the Springer S 25mm RTA implements a gold-plated two-post build deck specifically built for single coil configurations. Coil leads are inserted into the terminal openings when the posts are pressed down, and automatically clamps when the pressure is released for a Screwless Coil building system. The result is a wide range of coil accommodation, ranging from small simplistic wires to large claptonized builds. Airflow enter the structure through dual exterior airslots, redirects into the central internal air tube for a direct-to-coil air path.
Tigertek Springer S RTA Features:
- 24mm Base Diameter
- 26mm Widest Diameter
- 2mL Standard Juice Capacity
- 3.5mL Maximum Juice Capacity
- Superior Stainless Steel Construction
- Pyrex Glass Reinforcement
- Unique Two-Post Build Deck Design - Screwless Design
- Spring-Loaded Mechanism - Pressed Down to Expose Terminal Openings
- Single Coil Configuration - Flavor-Focused
- PEEK Insulators
- Dual Slotted Bottom Airflow Control
- Single Internal Air Tube
- 13mm Wide 810 Delrin Widebore Drip Tip
- Gold-Plated 510 Connection
- 1 Springer S RTA
- 1 3.5mL Bubble Glass Tube
- 1 Press Sheet
- Spare Parts & O-Rings
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.