The Morphe 24mm RDA by Tigertek delivers another Screwless Coil building system with a specialized clamp-style two-post design for unprecedented building configurations along with dual side airflow control, and optional BF squonking pin. The marquee achievement of the Morphe RDA resides in the modernized Screwless two-post build deck design, integrating a spring-loaded component to the clamp-shelf. The two terminals are exposed by pressing on the posts, allowing users to insert the coil wires within the widespace between the large surface area of the terminal base and the clamp itself, secured by releasing the mechanism. Airflow enters the structure through dual slotted exterior airflow, creating a direct-to-coil air path for a dynamic vapor production. Each Morphe RDA comes with a squonk-read BF 510 pin to make one of the most complete squonk RDA in the market.
Tigertek Morphe 24mm RDA Features:
- 24mm Diameter
- Deep Juice Well
- Superior Stainless Steel Construction
- Unique Clamp-Style Two-Post Design - Screwless Design
- Spring-Loaded Mechanism - Press Down to Expose Terminal Openings
- Single Coil Configuration
- PEEK Insulators
- Double O-Rings Secured
- Side Adjustable Airflow Control - Dual Slotted
- 17mm Wide 810 Delrin Doc Widebore Drip Tip
- 510 Drip Tip Adapter
- Gold-Plated BF Bottom Feeding 510 Pin
- Gold-Plated 510 Connection
- 1 Morphe RDA
- 1 Delrin 510 Drip Tip Adapter
- 1 510 BF Squonk Pin
- Spare Parts & O-Rings
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.