The Momentum 24mm RDA is the result of collaborative effort from Tigertek and VapingwithTwisted420, introducing a dynamic build deck with 6 terminals design, a multi-hole honeycomb style airflow cap, and a bottom fed gold-plated squonk pin. Measuring in at 24mm, the Momentum RDA has an expansive build deck featuring a two-post, dual terminal section and a postless, four terminals section. This results in an astounding amount of build configurations and styles to situate the coils. In addition, the build deck has a fairly deep juice well to accommodate the cotton wicks and the saturated juice to prevent dry hits. The lightly knurled top cap assembly hosts the honeycomb-style top cap and can be twisted to adjust the number and pattern of holes that are presented and are in use. In addition, the Momentum possesses a gold-plated squonk pin for those that like to juice on the go without the need to carry any supplemental bottles of eLiquids.
Tigertek Momentum 24mm RDA Features:
- Collaboration with VapingwithTwisted420
- 24mm Diameter
- Deep Juice Well
- Superior Stainless Steel Construction
- Unique Build Deck Design - 6 Terminals Available
- Two-Post, Dual Terminal Section
- Postless, Quad Terminal Section
- Top & Side Secured via Hex Screws
- Single or Dual Coil Configuration
- PEEK Insulation
- Dual Multi-Hole Honeycomb Side Airflow
- Adjustable Airflow Top Cap
- Detachable Structure
- 810 Widebore Resin Drip Tip
- 510 Drip Tip Adapter
- Gold-Plated 510 Squonk BF Pin
- Gold-Plated 510 Connection
- Available in Stainless Steel, Silver, Black, Blue, Gunmetal
- 1 Momentum 24mm RDA
- 1 810 Resin Drip Tip
- 1 510 Adapter
- 1 Squonk Pin
- 1 Screwdriver
- 1 Accessory Bag
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.