The Viper 24mm RTA by Wotofo introduces a new flavor-oriented platform with the implementation of two-post, single terminal per post design with dual slotted side airflow delivery. The Viper RTA measure 24mm in diameter, implementing a beautifully machined chassis with raised circles on the top and bottom base for convenient knurling and handling of the system. It is constructed with 316 Stainless Steel for the chassis and completed with an ULTEM top cap for a stunning impression. The tank reservoir measures 3 milliliter of maximum e-juice, accessed via a threaded top cap design to expose the large filling ports. Within the spacious chamber is an user-friendly two-post, single terminal design, catering to single coil configurations that synergizes with the conical top camber section to enhance the flavor production. Coil leads are inserted into the 2mm terminal openings, top-secured via Phillips flathead screws. Airflow of the Viper RTA a dual slotted cutout, providing ample airflow delivery straight to the core. A truly striking chassis design with capable performance, The Viper RTA by Wotofo is a worthy considering for building enthusiasts.
The Viper 24mm RTA Features & Specs:
- 24mm Diameter
- Deep Juice Well
- Superior 316 Stainless Steel Construction
- Embedded Build Deck Design
- Unique Two-Post, DualTerminal Design
- Shelf-Style Clamp Configurations
- Two Terminals Per Post
- Top-Secure via Phillips Screw
- PEEK Insulators
- Dual Slotted Airflow Delivery
- Direct-to-Coil Chamber Effect
- Delrin Widebore Drip Tip
- 810 Drip Tip Adapter
- 24K Gold-Plated 510 Connection
- 1 The Viper RTA
- 1 Multifunctional Key
- 1 Set of Prebuilt Clapton Wire
- Spare Parts & O-Rings
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.