The Stentorian All Tech AT-7 100W Box Mod presents a visually impressive transparent chassis design made with engineering ingenuity, featuring a large PCB onboard chipset capable of throttling up to 100W with a built-in 3500mAh Li-Polymer battery. The Stentorian AT-7 100W Mod is precisely milled with highly durable alloy construction, housing an acrylic glass centerpiece to provide a transparent view of the internal system. With the added element of colorful LED Light on the PCB Board to shine off the device, the device evokes an aggressive and futuristic look and feel. The intelligent PCB is highly advanced, implementing a direct output voltage-based system up to 100W of power along with a suite of safety protection. The AT-7 Mod is equipped with a 3500mAh Li-Po Battery, charged via microUSB port for long range and minimal down time.
Stentorian All Tech AT-7 100W Box Mod Features:
- WOTOFO Colalboration
- Dimensions: 90mm by 74mm by 32mm
- Built-In 3500mAh Li-Po Battery
- Maximum Wattage Output: 100W
- Minimum Atomizer Resistance: 0.1ohm
- Visually Striking Transparent Chassis
- Durable Alloy Shell Construction
- Superior Acrylic Glass Cover
- Cooling Circulation System
- Unique Super Large PCB Board
- Unique Booster Version on PCB
- Short Circuit Protection
- Low Voltage Protection
- Overtime Protection
- Low Resistance Protection
- Over Output Voltage Protection
- Over-Heat Protection
- Over-Charge Protection
- Micro-USB Port
- 510 Connection
- 1 Stentorian AT-7 Mod
- 1 MicroUSB Cable
- Instructional Manua
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.