The Springer X RDA by Tigertek delivers one of the most functional build deck in the industry, deploying a two-post design with a variety of terminal opening sizes clamp down by a spring-loaded mechanism. Measuring 24mm in diameter, the Springer X RDA is a four-piece structure with a 10mm deep juice well that can accommodate up to 2 milliliters of E-Juice. The crowning achievement lies within the build deck, integrating a two-post design with the implementation of four terminals of various sizes in each post ranging from circles of 1.4mm diameter to squares measuring 2.5mm by 3mm. Coil leads are inserted into the terminal openings when the posts are pressed down, and automatically clamps when the pressure is released. The result is a wide range of coil accommodation, ranging from small simplistic wires to large claptonized builds. Airflow enter the structure through the top section of the wall sleeve, fully adjustable by knurled top cap for tremendous cloud chasing effect or fully closed to maximize flavor recreation. Included with the Springer X RDA is a pair of competition widebores: 11mm Wide 810 ULTEM drip tip and a 9mm Wide 810 Delrin drip tip.
Tigertek Springer X RDA Features:
- 24mm Diameter
- 10mm Deep Juice Well - Holds up to 2mL
- Superior Stainless Steel Construction
- Unique Two-Post Build Deck Design
- Spring-Loaded Mechanism - Pressed Down to Expose Terminal Openings
- Four Terminals Per Post: Two 1.5mm Holes, One 2mm by 2.5mm, One 2.5mm by 3mm
- PEEK Insulators
- Double O-Rings Secured
- Top Adjustable Airflow Control - Dual Slotted
- 11mm 810 ULTEM Widebore Drip Tip
- 9mm 810 Delrin Widebore Drip Tip
- Gold-Plated 510 Connection
- 1 Springer X RDA
- 1 Allen Key
- 2 Prebuilt Clapton Coils
- Spare Parts & O-Rings
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.