The SMY SDNA 200 TC Box Mod is a giant leap in Simeiyue's line-up, integrating one of the most advanced comprehensive output technology, the Evolv's DNA200 Chip with an internal 3S 1600mAh LiPo battery (equivalent to 4800mAh), in a svelte structural chassis and beautiful carbon fiber diagonal trim. Designed by the creative and innovative craftsmen at Simeiyue, the SDNA 200 features precision machining with bevel corners and a diagonal lining of carbon fiber inlay for a classy aesthetics configuration. The result is a timeless device that fits perfectly into the user's hands, making daily use simple and non-fatiguing. Integrated within the SDNA 200 is a 1600mAh 3S Lithium Polymer battery, totaling at 4800mAh capacity to feed the onboard Evolv DNA200 with the necessary power to reach 200W to full effect. The genuine patented DNA200 is the premier processor, featuring incredible 97% output efficiency rating, tremendous range from 1 to 200 watts, full temperature control with wide range of heating elements, and coupled with Escribe software for unprecedented customization features and upgradeable output capability. The culmination of advanced performance range and amazing precision machining, the SMY SDNA 200 is one of the premiere DNA200 output technology.
SMY SDNA 200 TC Box Mod Features:
- Wattage Output Range: 1~200 Watts
- Voltage Output Range: 1~9 Volts
- Temperature Range: 200-600F
- Min Kanthal Resistance: 0.1ohm
- Min Temperature Resistance: 0.08ohm
- Genuine Evolv DNA200 Chip
- Intuitive OLED Display
- High Quality Alloy Construction
- Premium Carbon Fiber Diagonal Inlay
- Precision Stainless Steel Operational Buttons
- 3S 1600mAh Lithium Polymer Battery
- Equivalent to 4800mAh 35C
- Reverse Protection System
- Upgradeable Escribe Software
- 97% Output Efficiency
- Cell-by-Cell Monitoring
- Cell Balancer
- Atomizer Protection
- Low Resistance Protection
- Short Circuit Protection
- Overheat Protection
- Low Voltage Step Down Protection
- Stainless Steel Spring-Loaded 510 Connection
- 1 SMY SDNA 200 Mod
- 1 MicroUSB Charger
- Instruction Manual
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.