Smoktech ZMAX Mini Starter Kit

The ZMAX Mini is much like the original ZMAX but of course, a smaller more convenient mod depending on one’s preference. It carries great reputation in the vaping community and has been proven to have the durability factor. This beautifully polished piece has variable voltage and wattage which provides the ultimate vape experience regardless of what you attach to it. It can be adjusted from 3 – 6 volts in 0.1 volt increments and 3 – 15 watts in 0.5 watt increments. This simply shows you how powerful the ZMAX Mini is. The SMOKtech ZMAX Mini is 510 and eGo compatible allowing you to use any eGo cartomizers, atomizers, and clearomizers without having to purchase an adapter. It comes with a 18650 battery with a standard end cap and allows a flat or bottom top. Similar to the ProVari, the ZMAX Mini uses a single button for easy use of functions. If you hit the button 3 times, you will get the menu where the settings can be modified to suit your own preference. Each additional time the button is pressed after the 3rd time, it will navigate you through the menu. The ZMAX Mini has a 2-second delay after pressing the button which will confirm your setting of choice. After that 2 seconds is up, the user must start over to change the settings again.

SMOKtech Zmax Mini Kit includes:

• 1x Zmax Mini tube
• 1x 18350 battery
• 1x 510 dct tank
• 1x Multi Charger
• 1x 10ml Refill Bottle
• 1x 18650 extension ring
• 1x gift box
• 1x user manual

Specs:

• Adjustable variable voltage from 3-6 volts in 0.1 volt increments
• Adjustable wattage from 3-15 watts
• Made of stainless steel
• 510/ego compatible
• 4 amp output limit
• Flexible 360 degree button so it never gets stuck
• Blue LED light
• Built in display (voltage output, battery remaining, atomizer resistance, power on/off, and LED on/off)
• Chrome polished finish
• Solid feel
• Smaller size than original Zmax for portability

Error codes:

• LOR (Lower Resistance Indication) – this code appears when the resistance is below 1.2 ohm
• LOU (Lower Voltage Indication) – this code appears when the battery voltage is below 3.4 volts
• WSC (Short Circuit Indication) – this code appears when the atomizer or cartomizer output has short-circuit
• Low Battery Indicator -  the push button will start flashing red when your battery is low

Menu Options:

• Uu – Voltage Up
• Ud – Voltage Down
• So -  Standby ON/OFF
• Uc – Battery Voltage Check
• Ds – Display change/Resistance/Voltage output/Voltage underload “live”
• Lo – LED ON/OFF
• Up – Voltage Power and Wattage settings
• Po – Constant Power Operation
• Uo – Constant Voltage Operation