The SMOK Veneno 225W TC Box Mod is the newest dual 18650 platform to enter the LED vape device segment, featuring futuristic design elements to pair with 225W of maximum power and comprehensive temperature control suite. Featuring a classic vertical-based chassis with a modern touch, the Veneno 225W TC Box Mod integrates two V-shape LED strips located below the 0.96" OLED display and five strips located on the back of the device. Ergonomically, the Veneno features a stealthy squeeze-to-activate firing bar and an easy-to-access hinged battery door cover. Powered by dual high-amp 18650 batteries (sold separately), the Veneno has a maximum firing power of 225W and a plethora of output adjustments ranging from temperature control suite with added Memory Mode for increased precision as well a full-suite of protection.
SMOK Veneno 225W Full Starter Kit
SMOK Veneno 225W TC Box Mod Features:
- Dimensions: 85m by 47.3mm by 30.6mm
- Dual High-Amp 18650 Battery - Not Included
- Maximum Wattage Output: 6-225W
- Min Atomizer Resistance: 0.05ohm
- Temperature Range: 200-600F
- Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
- Precision Memory Modes
- Premium Zinc Alloy Construction
- 12-Color LED Light-Up Strips - Fully Customizable
- 6-Color OLED Display Matrix
- Stealth Firing Bar Mechanism
- Hinged Battery Door Access
- Intelligent Atomizer Recognition
- Battery Series Connection
- Short Circuit Protection
- Over-Heat Protection
- Over Discharge Protection
- 12 Seconds Cut-Off
- MicroUSB Port - Firmware Upgrades
- 510 Connection
- Available in Stainless, Black, Red, Gold, Purple, Rainbow
- 1 Veveno 225W Box Mod
- 1 MicroUSB Port
- Instructional Manual
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.