SMOK SCAR-P3 80W Pod Mod Kit

Check out the SMOK SCAR-P3 80W Pod Mod Kit, featuring a 5-80W range, integrated 2000mAh battery, and is compatible with the renowned SMOK RPM Coil Series. Constructed from durable zinc-alloy, the chassis of the SMOK SCAR-P3 is impervious to light falls and drops. Delivering output in a 5-80W range, the SCAR-P3 Pod System works well with the SMOK RPM Coil Series, delivering delicious vapor in MTL or DTL fashion depending on the coil installed. Featuring intelligent atomizer detection, the SMOK SCAR-P3 can detect the installed coil type for better function. 

SMOK SCAR-P3 80W Pod Mod Kit Features:
IQ-80 Chipset
Dimensions - 110mm by 32.3mm by 27mm
Integrated 2000mAh Rechargeable Battery
Wattage Output Range: 5-80W
Voltage Output Range: 0.5-4V
Resistance Range: 0.2-2.5ohm
Zinc-Alloy Chassis Construction
Single Intuitive Firing Button
0.96" TFT Color Screen
Two Adjustment Buttons
5.5mL Refillable Pod Capacity
Side Fill System - Silicone Stoppered
SMOK RPM Coil Series
0.4ohm RPM Mesh Coils - rated for 25W
0.16ohm RPM 2 Mesh Coils - rated for 25-50W
Press Fit Coil Installation
Dual Airflow System - MTL & DTL Vaping
Magnetic Pod Connection
USB Type-C Port
Available in Black, Fluid Black Grey, Fluid Red, Fluid Blue, Fluid Green, Red, Prism Rainbow, Fluid 7-Color

Includes:
1 SCAR-P3 Pod Mod
1 0.4ohm RPM Mesh Coil
1 0.16ohm RPM 2 Coil
1 SCAR P-3 RPM Pod
1 SCAR P-3 RPM 2 Pod
1 USB. Type-C Cable
1 User Manual

Make sure to properly prime each coils and pods before use.

Warning: If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.