The SMOK OSUB Plus 80W TC Starter Kit builds upon the original OSUB ecosystem, improving upon performance-driven out, fully-loaded chipset with power upgrade up to 80W combined with enlarged chassis and paired with the new Brit Beast Sub-Ohm Tank. The SMOK OSUB Plus features the ergonomic hand-friendly design, with a streamlined shape that features a lateral stealth C-Shaped firing bar. Integrated with an intuitive OLED screen with adjustment buttons and microUSB port directly below, convenience and highly ergonomic form factor is the marquee design. The chipset is highly dynamic, powered by a 3300mAh internal battery that fires up to 80W with a fully firmware upgradeable system, allowing for additional support and revisions. The OSUB Plus 80W implements comprehensive temperature control settings, with support for Ni200 Nickel, Stainless Steel, and Titanium heating elements. The Brit Beast Tank is a flavor-focused atomizer platform, featuring 510 V-Shape drip tip, bottom adjustable airflow system, 2mL with threaded top-fill, and utilizes the TFV8 Baby Beast's Coil structure. With a compact and capable device paired with a capable sub-ohm tank, the SMOK OSUB Plus 80W TC Starter Kit is an affordable starter kit with fully-featured functionalities.
Check out the TFV8 Baby Replacement Coils here.
SMOK OSUB 80W TC Mod Features:
- Dimensions: 75mm by 54.5mm by 22mm
- Integrated 3300mAh Battery Capacity
- Wattage Output Range: 1-80W
- Voltage Output Range: 0.8-9V
- Minimum Atomizer Resistance: 0.6ohm
- Temperature Control Range: 200-600F
- Supports Ni200, Titanium, and Stainless Steel Heating Elements
- High Quality Zinc Alloy Construction
- Intuitive OLED Side Screen
- Stealth C-Shaped Lateral Firing Bar
- Two-Button Adjustments
- Intelligent Atomizer Recognition
- Overheat Protection
- Puff Monitoring System
- 12 Seconds Cut-Off
- Overheat Protection
- Short-Circuit Protection
- Low Battery Warning
- 510 Connection
SMOK Brit Beast Sub-Ohm Tank Features:
- 24.5mm Diameter
- 3.5mL Juice Capacity
- Superior Stainless Steel Construction
- Pyrex Glass Reinforcement
- Flavor-Focused Design
- Threaded Top-Fill Method
- Top Dual Adjustable Airflow System
- Bullet Widebore Drip Tip
- 510 Connection
- 1 OSUB Plus 80W TC Box Mod
- 1 Brit Beast Tank
- 2 0.4ohm V8 Baby-Q2 Coil
- 1 Replacement Glass Tube
- 1 MicroUSB Cable
- Spare Parts & O-Rings
- Instructional Manual
In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.
Do not use Ni200, Titanium, and Stainless Steel with non-temperature control devices/mods. This is a risk of battery explosion! Please make sure that the devices/mods that you are using is capable of controlling coil temperature.
Warning: This tank is a Sub-Ohm resistance atomizer and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.