The SMOK OSUB One 50W TC All-In-One Kit is the modern progression of the OSUB platform, integrating the efficiently-designed tank into the compact chassis with 50W of maximal power output and comprehensive temperature control chipset. One of the most advanced and ergonomic systems in any class today, the OSUB One packs in many of the same features of the OSUB Plus Kit, with a similar sized architecture structural. Output range in standard wattage mode ranges from 1 to 50W, with a sophisticated temperature control that supports Ni200 Nickel, Titanium, and Stainless Steel heating elements. Constructed out of high-quality Zinc Alloy for durability factor, the OSUB One features a 0.94 inch OLED screen with neatly organized data and feedback information, alongside two adjustment buttons below for convenient placement during operational usage. The integration of the sub-ohm tank inside the output device is highly unique and one of the most visually uniform sets available today. The tank assembly provides a top-attached coil system, with a unified chimney and top tank section for convenient top-fill capability while eliminating leakage for a secure and pocket-friendly apparatus. With a beautiful, well-built chassis along with well-rounded performance and innovative functionalities, the SMOK OSUB 50W TC All-In-One Kit is a benchmark in starter kits.
Check out the SMOK OSUB One Replacement Coils here.
SMOK OSUB 50W TC Mod Features:
- Integrated 2200mAh Battery
- 2mL Juice Capacity
- Dimensions:96.5mm by 55mm by 26mm
- Wattage Output Range: 1-50W
- Voltage Output Range: 0.8-9V
- Minimum Atomizer Resistance: 0.6ohm
- Temperature Control Range: 200-600F
- Supports Ni200, Titanium, and Stainless Steel Heating Elements
- High Quality Zinc Alloy Construction
- Intuitive OLED Side Screen
- Stealth C-Shaped Lateral Firing Bar
- Two-Button Adjustments
- Intelligent Atomizer Recognition
- Overheat Protection
- Puff Monitoring System
- 12 Seconds Cut-Off
- Overheat Protection
- Short-Circuit Protection
- Low Battery Warning
- Convenient Top-Fill Method - Threaded Top Cap
- Top Adjustable Airflow System
- SMOK's OSUB One Coil System
- 0.2ohm Dual Core - rated 20-50W
- Delrin Widebore Drip Tip
- 510 Drip Tip Adapter
- 510 Connection
- 1 OSUB 50W Mod
- 1 Intergrated Tank
- 2 0.2ohm OSUB One Dual Core
- 1 MicroUSB Cable
- Spare Parts
- Instruction Manual
In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.
Do not use Ni200, Titanium, and Stainless Steel with non-temperature control devices/mods. This is a risk of battery explosion! Please make sure that the devices/mods that you are using is capable of controlling coil temperature.
Warning: This tank is a Sub-Ohm resistance atomizer and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.