SMOK Micro One 150 TC Starter Kit

The SMOK Micro One 150 TC Starter Kit combines two of SMOKTech's newest products, the highly capable R150 Mod and gorgeous Minos Sub-Ohm Tank, in a powerful yet easy-to-use featured set. 

SMOK R150 150W TC Box Mod Features:

• Integrated 1900mAh Battery Capacity
• Wattage Output Range: 6~150W
• Voltage Output Range: 0.35~8V
• Temperature Range: 200-600F
• Min Atomizer Resistance: 0.08ohm
• Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
• Temperature Coefficient of Resistance (TCR) Adjustments
• Intelligent Atomizer Recognition
• Adjustable Initial Resistance
• Premium Rubberized Finish
• Durable Soft Feel 
• Intuitive OLED Display
• Oversize Firing Mechanism 
• Top-Sided Two-Button Adjustment
• MicroUSB Port - Firmware Upgrades
• Puff Monitoring System
• 12 Seconds Cut-Off
• Low Battery Warning
• Short-Circuit Protection
• Over-Heat Protection
• Spring-Loaded 510 Center Pin

SMOK Minos Sub-Ohm TC Tank Features:

• 25mm Diameter
• 4mL Juice Reservoir
• Superior Stainless Steel Construction
• 0.3ohm Minos Q2 Core - rated for 30~80W
• 0.3ohm Minos-RTA M2 - 24.5mm Build Deck
• Convenient Threaded Top-Fill Method
• Adjustable Airflow System
• Sloped Delrin Drip Tip
• 510 Thread Connection

Includes:

• 1 R150 Box Mod
• 1 Minos Sub-Ohm Tank
• 1 0.3ohm Minos Q2 Coil Head
• 1 Minos-RTA M2 Deck
• 1 Replacement Glass Tube
• 1 MicroUSB Cable
• Spare Parts
• Instructional Manual

In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.

Do not use Ni200, Titanium, and Stainless Steel with non-temperature control devices/mods. This is a risk of battery explosion! Please make sure that the devices/mods that you are using is capable of controlling coil temperature.

Warning: This tank is a Sub-Ohm resistance atomizer and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.