The SMOK Koopor Knight 80W TC Box Mod is a highly sophisticated battle-tested set with the inclusion of the refined Koopor Mini 2 80W TC Box Mod alongside TPD compliant Helmet Tank. The Koopor Mini 2 80W TC builds upon the beloved Koopor series, bringing power and functionality upgrades with 80W of maximum output, a 33% increase from the original Koopor Mini, minimum atomizer of 0.06ohm, and temperature regulation support. SMOK's implementation of sophisticated temperature control support for Ni200 Nickel, Titanium, and Stainless Steel heating elements with proprietary TCR adjustments makes the Koopor Mini 2 one of the most advanced compact device in the market. The structural architecture integrates 0.91 Inch Bare OLED display, horizontal dual adjustment buttons, magnetized battery cover, and altogether work in synergy for optimal operational handling. The included Helmet Sub-Ohm TC Tank implements a TPD compliant assembly and design, featuring locking top-refill mechanism for the 2mL U-shaped juice reservoir and adjustable top-airflow system. The tank assembly provides a top-attached coil system, with a unified chimney and top tank section for convenient top-fill capability while eliminating leakage and work in conjunction with a child-lock mechanism for a secure and pocket-friendly apparatus. Brilliantly constructed with fundamentally proven design and versatile cutting-edge technology, the SMOK Koopor Knight 80W TC Box Mod is a worthy champion in compact starter kit industry.
Check out the Helmet-CLP Replacement Coils here.
SMOK Koopor Mini 2 TC Box Mod Features:
- Single High-Amp 18650 Battery - Not Included
- Wattage Output Range: 1~80W
- Voltage Output Range: 0.8-9V
- Temperature Range: 200-600F
- Min Atomizer Resistance: 0.06ohm
- Supports Ni200 Nickel, Titanium, and Stainless Steel
- Temperature Coefficient of Resistance (TCR) Adjustments
- Intelligent Atomizer Recognition
- Premium Zinc Alloy Construction
- Mythical Creature Engraving
- Durable Soft Feel and Shiny Finish
- Intuitive 0.91 Inch OLED Display
- Oversize Firing Mechanism
- Two-Button Adjustment
- Magnetized Battery Cover
- MicroUSB Port - Firmware Upgrades
- 510 Center Pin
SMOK Helmet Tank Features:
- 24.5mm Diameter
- 2mL Juice Reservoir
- Superior 304 Stainless Steel Construction
- Medical Glass Reinforcement
- EU TPD Compliant Child-Lock Mechanism
- Top Pressure Spinning Design
- Convenient Top-Fill Method
- Unified Integration of Atomizer Base to Top Cap
- Top Adjustable Airflow System
- Sloped Delrin Drip Tip
- 510 Thread Connection
In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.
Do not use Ni200, Titanium, and Stainless Steel with non-temperature control devices/mods. This is a risk of battery explosion! Please make sure that the devices/mods that you are using is capable of controlling coil temperature.
Warning: This tank is a Sub-Ohm resistance atomizer and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.