The SMOK Guardian III 75W E-Pipe Mod is the premiere production of SMOKTech's most cutting edge e-pipe design in beautifully sculpted structure for a fully-packed device. The Guardian III 75W E-Pipe features an innovative take on e-pipe chassis, fits comfortably in hand with the biggest OLED display with fantastic user interface for simple operational usage. It has a classy cigar pipe profile, with a black lacquer finish for breathtaking impression with a premium form factor that you can truly feel. In addition, It is constructed from Polycarbonate and ABS Alloy, fireproof materials that will extends the durability and usage life of the device. The internal output system is notably advanced, integrated with output range up to 75W, minimum atomizer resistance of 0.06ohm, multitudes of safety protections, built-in BlueTooth 4.0 Technology, and firmware upgrades in the foreseeable future. The intelligent chip-set has remarkable temperature regulation accuracy and sensing capability, supporting Ni200 Nickel, Titanium, and Stainless Steel heating wires. Under temperature control setting, the Guardian III Mod is capable of superior control with Adjustable Initial Resistance, a system that reduces atomizer contact problems and Temperature Coefficient of Resistance (TCR), a proprietary technology to adjust resistance of a wide range of heating elements to different ranges. Altogether, the Guardian III Kit is a fully-inclusive device with an innovative take on the e-pipe designs while maintaining outstanding technology capability that SMOK is known for.
SMOK Guardian III E-Pipe Mod Features:
- SIngle 18650 High Amp Battery - Not Included
- Output Wattage Range: 1~75W
- Output Voltage Range: 0.7~9V
- Min Resistance in VW Mode: 0.1ohm
- Min Resistance in TC Mode: 0.06ohm
- Temperature Range: 200-600F
- Fireproof Polycarbonate and ABS Alloy Construction
- Black Piano Lacquer Finish
- Classis Cigar E-Pipe Chassis
- Magnetic Battery Cover
- Ni200, Titanium, and Stainless Steel Compatibility
- Large Intuitive OLED Display
- Advanced BlueTooth 4.0 Technology
- SMOK Smart BEC Mobile App
- Daily Puff Tracker
- Adjustable Initial Resistance Technology
- Intelligent Atomizer Recognition
- Temperature Coefficient of Resistance Adjustments
- Overheat Protection
- Puff Monitoring System
- Overheat Protection
- Short-Circuit Protection
- Low Battery Warning
- Spring-Loaded 510 Center Pin
- MicroUSB Port - Firmware Upgrades
- 1 Guardian III 75W E-Pipe Mod
- 1 MicroUSB Charger
- Instruction Manual
In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.
Do not use Ni200, Titanium, and Stainless Steel with non-temperature control devices/mods. This is a risk of battery explosion! Please make sure that the devices/mods that you are using is capable of controlling coil temperature.
Warning: This tank is a Sub-Ohm resistance atomizer and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.
Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.