The Smoant Knight V1 60W TC Box Mod is a stealthy pocket-friendly device, integrating a dynamic chipset with 60W of maximum power, versatile temperature regulation, single 18650 battery configuration, and recessed 510 connection compatible with tanks up to 23mm. The Knight V1's intuitive architecture focuses on comfortability and dynamic handling, capable of housing a tank within the chassis, fitting up to 23mm in diameter. It implements dual panel windows, allowing users to gauge the level of e-juice and enabling adjustable airflow control for tanks without the hassle of removing the atomizer. It features side OLED screen display and three-button operation with oversized firing mechanism to complete the 83mm by 50mm chassis. The chipset is highly capable, featuring output range of 1 to 60W, minimum atomizer resistance of 0.1ohm, and temperature control settings with native support for Ni200 Nickel, Titanium, and Stainless Steel. With a well-rounded system and a discrete portable form factor, the Smoant Knight V1 60W Box Mod is a highly effective performance device with pocket-friendly capability.
Smoant Knight V1 60W TC Box Mod Features:
- Single 18650 High-Amp Battery - Not Included
- Wattage Output Range: 1~60W
- Voltage Output Range: 0.5~7V
- Min Atomizer Resistance: 0.1ohm
- Temperature Control Range: 200-600F
- Versatile Temperature Control Setting
- Ni200 Nickel, Titanium, Stainless Steel, and Compatible
- Soft-Contour Construction
- Houses 1 Atomizer Tank Up To 23mm in Diameter
- Side Screen OLED Display
- Three-Button Operation
- Hinged Battery Door Cover
- Low Resistance Protection
- Over-Time Protection
- Reverse Polarity Protection
- Overheat Protection
- MicroUSB Port - Passthrough Capability
- Spring-Loaded 510 Connection
- 1 Knight V1 Mod
- 1 MicroUSB Cable
- Instruction Manual
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.