Check out the new Smoant Knight 80 Pod Mod Kit, featuring a 4mL refillable capacity, single hgih amp 18650 battery, and can utilize coils from the Knight or Pasito Coil Series. Constructed from durable zinc-alloy, the chassis of the Smoant KNIGHT features a a single high amp 18650 battery, and can reach wattages of up to 80W. Powered by the intelligent ANT and Buckboost Chipset, the Smoant Knight can intelligently identify the coil installed for an accurate measure on the ideal wattage to extrude the best flavor and clouds of vapor. The 4mL refillable pod requires ot be filled from the side, located behind the silicone stopper to prevent leaks and spills.
Smoant KNIGHT 80W Pod Mod Kit Features:
ANT & Buckboost Chipset
Dimensions - 90mm by 45mm by 27mm
Single High-Amp 18650 Batteries - Not Included
Wattage Output Range: 1-80W
Temperature Range: 100-300℃ / 200-600 F
Bypass Mode - 0.1ohm-3.0ohm
Zinc-Alloy Chassis Construction
Single Firing Button
Dual Adjustment Buttons
0.96" OLED Screen
Magnetic Battery Cover
Drip Tip Airflow Control Ring
4mL Refillable Pod
Side Fill System - Silicone Stoppered
Smoant KNIGHT Coil Series
0.3ohm Knight80 Mesh Coil - rated for 50-65W
0.4ohm Knight80 Dual Mesh Coil - rated for 35-50W
0.3-2.0ohm Knight80 RBA
Compatibility with Pasito Coils - Adapter Sold Separately
0.6ohm Pasito Mesh Coil - rated for 20-25W
1.4ohm Pasito Ni80 Coil - rated for 10-13W
0.5-1.0ohm Pasito RBA
Bottom Pressfit Coil Installation
Magnetic Pod Connection
Low Voltage Protection
Over Heating Protection
10s Overtime Protection
Type-C USB Port
Available in Black, Bronze Blue, Stainless Steel, Tiffany Blue, Night Green
1 KNIGHT 80 Mod
1 KNIGHT 80 Cartridge
1 Type-C USB Cable
1 0.3ohm KNIGHT Mesh Coil
1 0.4ohm KNIGHT Dual Mesh Coil
1 Certificate Card
1 Warranty Card
1 User Manual
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.