Skip To Content

Smoant GAIA 200W TC Box Mod

$79.95

$64.95

Availability: Out of Stock

Product info:

The Smoant GAIA 200W TC Box Mod delivers a luxurious chassis with intricate GAIA-inspired engravings with exuberant paisley design, integrating similar chipset as the Charon 218 for a stunning balance of display and high-performance.
Wishlist

*Required fields

The Smoant GAIA 200W TC Box Mod delivers a luxurious chassis with intricate GAIA-inspired engravings with exuberant paisley design, integrating similar chipset as the Charon 218 for a stunning balance of display and high-performance. The GAIA 200W is constructed with a squared box mod chassis with soft comfortable contour all-around for an ergonomic feel when in-hand. This complements the complex GAIA engravings with beautiful paisley design to complete the exterior of high-end device. The battery door deploys a magnetized closing functionality, easily access to the dual 18650 batteries (sold separately) used to power the box mod. Similar to other Smoant's high-performance box mod, the GAIA has a high-power wattage limit of 200W and comprehensive temperature control regulation with support for Ni200 Nickel, Titanium, and Stainless Steel heating element and TCR adjustments.

Smoant GAIA 200W TC Box Mod Features:

  • Dual 18650 High-Amp Battery - Not Included
  • Wattage Output Range: 1-200W
  • Minimum Atomizer Resistance: 0.05ohm
  • Temperature Range: 200-600F
  • Versatile Temperature Control Module
  • Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
  • Temperature Coefficient of Relativity (TCR) Adjustments
  • Three Memory Mode
  • Intuitive Large 0.96 Inch OLED Display
  • Oversized Firing Mechanism
  • Ergonomic Adjustment Buttons
  • Low Resistance Protection
  • Over-time Protection
  • Reverse Polarity Protection
  • Overheating Protection
  • MicroUSB Port
  • GAIA Paisley & Scripts Engravings
  • 510 Connection

Includes:

  • 1 GAIA 200W Box Mod
  • 1 MicroUSB Cable
  • Instructional Manual

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.

Loading...