Smoant Charon Mini 225W Box Mod presents one of the utmost iconic device line-up in a smaller form factor, featuring a dual 18650 platform with 2.0" TFT Full-Color Screen and 225W maximum power output with full temperature suite. The Smoant Charon Mini 225W is quite compact, implementing a visually striking bezeled lines along with the device with the 2.0" TFT Full-Color Screen as the centerpiece. The user can switch between two different User Interfaces (UI), while knowing that a plethora of protections are active, keeping you and your device safe for future use. Powered by the latest Ant225 Chipset from Smoant, the Charon Mini is capable of 1 to 225W in output, 0.015 seconds instant fire, and custom temperature control suite.
Smoant Charon Mini 225W TC Box Mod Features:
- Dimensions - 89mm by 45mm by 29mm
- Weight - 160g
- Smoant Ant225 Chipset
- Dual 18650 High Amp Battery - Not Included
- Wattage Output Range: 1-225W
- Voltage Output Range: 6-8.4V
- Minimum Atomizer Resistance: 0.1ohm
- Temperature Control: 100–315°C / 200–600°F
- TCR Adjustments
- 2.0" TFT Full-Color Screen
- 300 dpi Resolution
- 262K Pixel Level
- Custom User Interface (UI) - Two Templates
- Low Voltage Protection
- Over-Heating Protection
- Overload Protection
- Over-Time Protection
- Over-Current Protection
- Short Circuit Protection
- Reverse Polarity Protection
- MicroUSB Port
- Centered Stainless Steel 510 Connection
- Available in Gold, Rainbow, Red, Black
- 1 Charon Mini 225W TC Mod
- 1 MicroUSB Cable
- 1 User Manual
- 1 Warranty Card
- 1 Battery Warning Card
- 1 Certificated Card
Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.
We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.